Hydraulic oil top off

   / Hydraulic oil top off #1  

8n Nut

New member
Joined
Mar 26, 2011
Messages
10
Location
Cosby, TN
Tractor
Ford 8N, Ford Jubilee, Ford 2810
Recently got a 53 Ford Jubilee that needs its hydraulic oil topped off. Can I fill the fill inlet by the gearshift and expect it to go to all 3 areas thnat require hydraulic oil e.g. transmission, differential, and pump. It has only 1 hydraulic oil dipstick so I am assuming the 3 sections are connedted and overflow into each other. Thanks for helping. 8n nut
 
   / Hydraulic oil top off #2  
Sorry.. don't work that way.

Did you notice that theye are 2 other fill locations? One under the front left of the seat.. and one behind the right rear of the seat.

trans is a single sump.

hyds is a single sump

diffy is a simgle sump.

PS.. I would advise against using plain hyd oil. A UTF oil meeting ,2c134 specs ( most all do these days ), is the preferred choice.

hyds has a dipstick.

diffy has a check plug left side of pto shaft.

trans has a check plug. right side of trans, about where yer heel rests, above the running board level. it's a plug not a bolt.. DO NOT remove any bolts from the side of the tranny or you will be posting back with even more questions.. :)
 
   / Hydraulic oil top off #3  
A jub manual would help cause there's a lot of changes between the jub and 8N. Welcome to the world of live hydraulics.

Kirk
 

Tractor & Equipment Auctions

2023 54' Hooklift Dumpster 15 Cubic Yard (A53422)
2023 54' Hooklift...
2022 JOHN DEERE 331G LOT NUMBER 96 (A53084)
2022 JOHN DEERE...
2025 Victor X-Pro Mini Dirt Bike (A55758)
2025 Victor X-Pro...
20711 (A50323)
20711 (A50323)
2018 FORD F-150XL CREW CAB TRUCK (A52706)
2018 FORD F-150XL...
2012 Freightliner M2 106 Asphalt Pothole Patcher Truck (A55852)
2012 Freightliner...
 
Top