Hydraulic Top Link NS 6010C

[reb0957]

Where is the best pace to buy a hydraulic top link for an NS6010C? And what part number?
I didn't realize when I ordered the tractor but the jump to the 60 series they have a Cat 2 3 point.
Thanks!

 

[MtnViewRanch]

Look at this link, get the asked for dimension and use that dimension to determine what the mid stroke of the unit should be plus or minus a fraction of an inch.

I recommend a cat 1-2 top link with a 2 1/2" dia cylinder with a 1 1/2" dia rod with a working length of 23 1/4- 35 1/4".

Look at the link, get the pin-pin distance asked for and see what you really need.

 

[JimR]

Make sure that the toplink that you buy has a stop valve on it. This keeps the piston from leaking down.

 

[grsthegreat]

i got mine from my local kioti dealer. i like supporting them. want them to stay open..... i also purchased mt 3rd function kit from them, even though they had them cheaper online. we still need to keep the brick and mortar stores open. you could look at Michiganiron also, they post on this site and are helpful people

Home Michigan Iron & Equipment Morrice, MI (855) 265-4590

Home Michigan Iron & Equipment Morrice, MI (855) 265-4590

www.michiganironandequip.com

 

[countrybumpkin]

You could always go chinesium

VEVOR Hydraulic Top Link Cat. 2-2（8-5/16 in, 19-11/16~28 in), Hydraulic Cylinder with 2 Hoses & G3/8" Check Valve | VEVOR US

VEVOR Hydraulic Top Link offers 4 tons of pushing force, high-sealing check valve, and durable 45# steel construction for efficient heavy-duty tractor tasks.

www.vevor.com

On a serious note, One thing to look at is the tractor side of your top link to make sure it’s cat 2 also. Many of the Kiotis of that size use a cat 1 on the tractor side. So if you were to order one from somewhere that was a cat 2 on both ends it will more than likely not fit the tractor side.

 

[JimR]

You could always go chinesium

VEVOR Hydraulic Top Link Cat. 2-2（8-5/16 in, 19-11/16~28 in), Hydraulic Cylinder with 2 Hoses & G3/8" Check Valve | VEVOR US

VEVOR Hydraulic Top Link offers 4 tons of pushing force, high-sealing check valve, and durable 45# steel construction for efficient heavy-duty tractor tasks.

www.vevor.com

On a serious note, One thing to look at is the tractor side of your top link to make sure it’s cat 2 also. Many of the Kiotis of that size use a cat 1 on the tractor side. So if you were to order one from somewhere that was a cat 2 on both ends it will more than likely not fit the tractor side.

If there is room for it, you can put a reducer bushing in it.