Hydraulic Valve Options

[Rowski]

Thanks for the link to Valu Bilt. I did ask then to send me a catolog. How are the prices/quality? Do you order a lot from them?

The price for the two circuit multiplier seems reasonable. I got a qutoe from V&M a year ago for the three circuit multiplier for around $400ish.

 

[DFB]

Derek, my original catalog was distributed by the local CT/Farm & Country store. Lots of the same stuff.

Needless to say CT/Farm/Quality Stores are long gone, but the Valu-Bilt connection still survives.

Hope it helps.

DFB

 

[Hugh]

Thanks for the info, on the cylinder will this one at northern tool work.
http://www.northerntool.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=49996&prmenbr=6970
I will need to weld the cat 1 ends on it.
Seems like someone would bild one with cat 1 ends on it.
Thanks for all the help.

 

[PaulT]

Go to <A target="_blank" HREF=http://www.princedirect.com>www.princedirect.com</A>. You can get that cylinder direct from the manufacturer for a better price. That particular cylinder is a tie-rod cylinder (has the metal rods at each corner holding it together). I prefer the welded cylinders, for space considerations and general "clean lines". The guy at Prince direct recommended a cylinder from the Wizard line for this application. Whatever you do, don't buy till you talk with him/w3tcompact/icons/wink.gif/w3tcompact/icons/smile.gif

 

[Ym1401King]

Here is another useful link for a company that has more than the valves, has cylinders and all kinds of things, really cheap.

http://www.baileynet.com

Aric

 

[Anonymous Poster]

Looking for "Rat". I just purchased a Kubota L48 TLB and want to add two remote SCV to rear of tractor for my hyd back blade. Have you come up with something other than Kubotas fender mounted SCV and all the hyd lines draped over fender? My dealer is checking to see if we can do something different.

 

[keeney]

Do you recall what size and type the fittings were on the plate on your 4100? I would like to add an accessory circuit, and getting the fittings and hose parts _BEFORE_ taking it all apart would be convenient.

- Rick