Hydraulics

   / Hydraulics #1  

Fornshell

Bronze Member
Joined
Jan 14, 2022
Messages
69
Tractor
JD2240
Hey Tx Jim, Hearing different ways to check Hyd/ Trans fluid on a JD 2240. What is the proper Way.
 
   / Hydraulics
  • Thread Starter
#3  
Dipstick behind your right heel sitting on tractor.
 
   / Hydraulics #4  
Hey Tx Jim, Hearing different ways to check Hyd/ Trans fluid on a JD 2240. What is the proper Way.
Does the tractor you're asking about have screw on cap or plastic handle? I was taught to check JD utility tractors built from '65-'92 with engine operating at idle speed, dipstick nut resting on threads. On later models push plastic knob into tube. I searched one 2240 operators manual # 71859 & couldn't locate answer to your question.
 
   / Hydraulics
  • Thread Starter
#5  
Does the tractor you're asking about have screw on cap or plastic handle? I was taught to check JD utility tractors built from '65-'92 with engine operating at idle speed, dipstick nut resting on threads. On later models push plastic knob into tube. I searched one 2240 operators manual # 71859 & couldn't locate answer to your question.
Plastic push in dipstick.
 
   / Hydraulics
  • Thread Starter
#6  
It has the plastic handle push in dipstick.
 
   / Hydraulics
  • Thread Starter
#7  
Cold or operating temperature.
 
   / Hydraulics
  • Thread Starter
#9  
Ok, thanks for your help.
 

Tractor & Equipment Auctions

Enclosed Service Truck (A55788)
Enclosed Service...
Commercial Lawn Mower 652R (A56859)
Commercial Lawn...
2008 DRAGON PNEUMATIC TRAILER (A58214)
2008 DRAGON...
2006 KOMATSU PC228USLC-3 EXCAVATOR (A60429)
2006 KOMATSU...
12ft. Flatbed Truck Body (A59230)
12ft. Flatbed...
Brock 60'x26' Flat Bottom Grain Storage Tank (A57148)
Brock 60'x26' Flat...
 
Top