hydro system filter

   / hydro system filter #1  

passgas55

Bronze Member
Joined
Aug 25, 2006
Messages
93
I have a 2210 and was unsure where the filter screen is on it. So I took a pic of where I think it is.

ake64l.jpg


Am I right or going in the wrong direction?
 
   / hydro system filter #2  
Right. Probably will need to pry it off once the bolts are out. Clean both surfaces, reassemble with #2 permatex. Drain transmission first or you will get soaked. Hopefully the picture you posted really needs to be rotated 90* clockwise.
 
   / hydro system filter
  • Thread Starter
#3  
I shot the pic by holding the cam sideways forgetting to rotate it afterwards. Either that or my tractor sleeps on its side:eek:
 
   / hydro system filter #4  
Looks like the right spot to me. I just changed and cleaned my YM226, does seem to do better. It says in the manual to use the tractor and get the hyd oil hot and stop, then the sediment will be suspended (in filter). Before you open the drain plug ***open the dip stick and release pressure in it; if you don't you will get covered in hyd oil, like I did... It should be around 3 to 4 gallons of hyd oil.. When I removed my filter cover it did not have a gasket. I cleaned the surface and installed it back without anything on it. It is not leaking at all.... Have fun working on your TOY!!!
 

Tractor & Equipment Auctions

New Kivel Walk Behind Pallet Forks (A50774)
New Kivel Walk...
10FT. S/A Utility Trailer (A49461)
10FT. S/A Utility...
2011 TRAIL KING LOWBOY TRAILER (A50459)
2011 TRAIL KING...
2017 Ford F-450 Crew Cab Knapheide Service Truck (A49461)
2017 Ford F-450...
2011 Cadillac SRX LUXURY (A50324)
2011 Cadillac SRX...
Zero Turn Mower (A48082)
Zero Turn Mower...
 
Top