hydrolic pump

[bob biggins]

hi i have a benye 224-18 and the input seal on the hydrolic pump is leaking is it a common seal or a hard to find size

 

[greg_g]

Odds are very good that it's either a common rubberized washer or a copper crush washer. I've got some of both in my spare parts bin, but I'd need to know the diameters. Can you find it in your parts manual?

//greg//

 

[LD1]

Almost all seals of all types are easy to find these days with the internet. All you need to know is the size. Local places might not carry them, but a few days to ship and you can have all sorts of parts that "used to be" hard to find:thumbsup:

Thank you al gore for the internet:laughing:

 

[bob biggins]

cant find anything to do with the little pump it hooks on the front of the crank was just wondering if thats normal or was there cause it had a front end loader
found the little tractor in a feild offered the guy 1000 drove it off had 500 hours on it so good deal but a little frustrating with the parts but the local toyota dealer been real nice about me raiding the bolt bin

 

[bob biggins]

i have the manuals too

 

[bob biggins]

the numbers i can read on the pump are g5-12-L-yt

 

[LD1]

Hooking on the front of the crank is normal for quite a few older tractors. Do you mind sharing what model of tractor it is?

 

[bob biggins]

its a benye 224-18 2004 is the year