Hydrostatic stall

[Diggingwithdiesel]

I was pushing under a log and lifting when the tractor stalled before I could release pressure. Immediately tried to restart it, but it won’t turn over at all. I have power, radio and gauges work. I’m thinking hydrostatic pressure must be relieved for engine to turn over. Any suggestions?

 

[ruffdog]

Did you release hydro pressure by cycling the pedals?

 

[Roadworthy]

Try turning on the key then depressing the forward or reverse pedal. That may do the trick.

 

[5030]

Sounds to me like you have other non related issues. Back when I had a hydrostat, once the motor died, the pressure dropped to nil.

 

[seville009]

Make sure the safety switches aren’t the cause after the stall - gear in neutral, pto off, etc

 

[oldnslo]

With travel pedals in neutral their will be no hydrostatic load on the engine so like others have stated the problem is something else probably safety switch related.

 

[Diggingwithdiesel]

Did you release hydro pressure by cycling the pedals?

That was the first thing I tried.

 

[grsthegreat]

Ive stalled hydrostats in the past, never anything needing to do but restart unit.

 

[Hoss710]

what model and type tractor?

 

[Diggingwithdiesel]

what model and type tractor?

Kubota B3030