IXLR8
Veteran Member
You have TDS* and there is NO cure for it, don't waste you time with the 12 step program.
*Tractor Derangement Syndrome.
I just bought an Echo 2511t clone for $99. What was I thinking?
- Thread starter airbiscuit
- Start date
- Views: 47900
*Tractor Derangement Syndrome.
CloverKnollFarms
Elite Member
Got my exhaust cover modified today
Hockfire Saws
Member
- Joined
- Jul 17, 2025
- Messages
- 29
- Tractor
- ASV RC60
Well with the new JonCutter in the mix I now have 3 brands of the 2511 with V-Modest and KNK Power. The KNK is a little different than the other two and nice saw. It was the first one I carried. But I need the room so I’m dropping it. I think I have 9 left and I’m going to blow them out at $70 a piece. No prep, no NGK spark plug and no testing. They shipped with the bar and chain installed which made the box very bulky so I dismounted them and modified the boxes. In other words, I have looked at each one and verified they are complete and nothing broken. The $70 includes shipping and starting Friday there won’t be any sales tax for anyone in Ohio. Here is a link to a post I put up about them last year:
And here is a video I did comparing them to the V-Modest:
And a video of cutting with one:
I’m putting this here first so you guys get a crack at these before anyone else.
And here is a video I did comparing them to the V-Modest:
And a video of cutting with one:
I’m putting this here first so you guys get a crack at these before anyone else.
CloverKnollFarms
Elite Member
Not bad looking
OP
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 6,565
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
Let us know how the tuning goes.
JeepHead
Veteran Member
- Joined
- Jul 13, 2023
- Messages
- 1,001
- Location
- The hills of Southern Indiana
- Tractor
- Kubota 2502H, HSI Pinnacle grapple, LP 48" forks, LP 60" BB, KK tiller 60", KK middle buster, Pat's QH
Looking forward to the test results!
CalG
Super Member
- Joined
- Sep 29, 2011
- Messages
- 5,954
- Location
- vermont
- Tractor
- Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601
It's too bad a proper two stroke expansion chamber exhaust is so bulky.
Those things can really make an engine come alive. BTDT racing motorbikes "when I was a young man".
Those things can really make an engine come alive. BTDT racing motorbikes "when I was a young man".
CloverKnollFarms
Elite Member
Got the new oil pump installed and the saw reassembled.
Seems a bit snappier than with the OEM can.
I have the oiler set as low as she will go, and there is no way it will starve the bar for oil
Seems a bit snappier than with the OEM can.
I have the oiler set as low as she will go, and there is no way it will starve the bar for oil
CloverKnollFarms
Elite Member
Went out and cut down, cut up, three smaller trees.
Snappy little motor. The 3/8LP is a bit grabby, I may address that later.
Runs great, starts super easy, oil reservoir lasts as long as a tank of fuel, not any longer... That is set to minimum
Snappy little motor. The 3/8LP is a bit grabby, I may address that later.
Runs great, starts super easy, oil reservoir lasts as long as a tank of fuel, not any longer... That is set to minimum