I lost a post!!

   / I lost a post!! #1  

DDT

Platinum Member
Joined
Dec 18, 2000
Messages
953
Location
Clay Center, Kansas
Tractor
Kubota M6040/cab, BX25D, RTVX900
I think? in Dec of 02 till the first part of 03 I had posted my cab I made for my 4400. I have searched hi and low. I can not find it any where. I know it was in this form (i think) that was before build it your self was here.
I got a virus and crashed my computer, so I lost all the pics of it. I would just like to keep the orginals if I could. Thanks to any one that can point me in the right area!!!
DDT
 
   / I lost a post!! #2  
I wondered if I possibly had downloaded any, and found two (I think they are yours) and will send them, just in case it helps.
 

Attachments

  • 459612-Cab4400frame.jpg
    459612-Cab4400frame.jpg
    74.9 KB · Views: 332
   / I lost a post!! #3  
This is the other that I have.
 

Attachments

  • 459613-Cab4400.jpg
    459613-Cab4400.jpg
    75.8 KB · Views: 314
   / I lost a post!!
  • Thread Starter
#4  
That is her.
I don't suppose we could find the post.
 
   / I lost a post!! #5  
I thought you had already looked at your posts, but thought I would for kicks.
I found this.
Cab in Progress
 
   / I lost a post!! #6  
DDT. If you ever need to find one of your posts again, just click on your name and then on "show all user's posts." You should be able to find it if you have an idea of when you posted and the subject. Of course, many changes have occurred since you made the original post, and maybe it's not on that list any more?
I wanted to ask if you ever made a heater for it. I was worried about your use of the engine heat as you may be getting too much carbon monoxide that way. You blood attracts carbon dioxide even easier than oxygen and it doesn't take a lot to cause you harm. Just a thought on your safety. John
 
   / I lost a post!!
  • Thread Starter
#7  
That is it. I sure could not locate it. Thanks beenthere.
KiotiJohn, thanks for the tip, I guess that would be the easy way to do it, since I now how now!
I am still useing engine heat, most of the time I have my coats & gloves off. There is no carbon monoxide in the cab that I now off. I don't feel tierd, eyes don't burn so I think I am OK. As long as I don't have any exhast leaks. Now if the wind is wrong and I leave the door open when I get out, that is another story.
I did have the glass tinted last fall before I put it on for the winter. Much Better.
 
   / I lost a post!! #8  
I wanted to ask if you ever made a heater for it. I was worried about your use of the engine heat as you may be getting too much carbon monoxide that way. You blood attracts carbon dioxide even easier than oxygen and it doesn't take a lot to cause you harm. Just a thought on your safety. John
------------------------------------------------------------------------
John, I think that is a diesel and diesels don't emit carbon monoxide fumes.
Michael
 
   / I lost a post!!
  • Thread Starter
#9  
diesels don't emit carbon monoxide fumes.
)</font>

I learned some thing today. Thanks Michael
 
   / I lost a post!! #10  
</font><font color="blue" class="small">( John, I think that is a diesel and diesels don't emit carbon monoxide fumes.
Michael )</font>

Diesels and CO
Michael, this is a common misconception, and I have no idea why it ever got started. While diesels put out LESS CO than do gas engines, they still emit CO. CO is the byproduct of any internal combustion. Check out the article link to see more. John
 

Tractor & Equipment Auctions

2014 Dynapac CC4200 Tandem Vibratory Roller (A51039)
2014 Dynapac...
VOLVO L45G WHEEL LOADER (A51242)
VOLVO L45G WHEEL...
BUSH HOG 32601 - 6' ROTARY MOWER (A51243)
BUSH HOG 32601 -...
2018 Vermeer D23X30 S3 Navigator Directional Drilling Machine (A49461)
2018 Vermeer...
2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A51039)
2017 Ram 5500...
2018 Generac MLT6SM-STD3 6kW Towable Light Tower (A49461)
2018 Generac...
 
Top