I thought I'd seen it all.....
- Thread starter CAgnoli
- Start date
- Views: 3298
LC Brewing
Bronze Member
- Joined
- Jul 6, 2006
- Messages
- 68
- Tractor
- I wish (someday)
Good one.
JWaterstreet
New member
- Joined
- Oct 3, 2004
- Messages
- 21
Hahaha.... the friend isn't in the picture as he went in to clean out his shorts!!
The 2000 series are barely larger than lawnmowers; I'm surprised we don't see more of these pictures given the types of stuff their owners put them through on this board. (I'm used to full size tractors & backhoes, so my 970 seems pretty dinky to me.) Then again, it is a testament to the quality of the units if they hold up to this abuse.
The 2000 series are barely larger than lawnmowers; I'm surprised we don't see more of these pictures given the types of stuff their owners put them through on this board. (I'm used to full size tractors & backhoes, so my 970 seems pretty dinky to me.) Then again, it is a testament to the quality of the units if they hold up to this abuse.
RWEST
Gold Member
- Joined
- Aug 11, 2003
- Messages
- 479
- Location
- Windber, PA
- Tractor
- ALL J-D's: 955, X595, 6x4 Diesel Gator, CX Compact Gator, 310D Loader/Backhoe (4x4, turbo, extend-a-hoe)
Yikes!! I don't know about that series of J-D's, but my 955's front brakes don't work if the 4wd isn't engaged, so, if you're hauling a bit more weight than you should in 2 wd and the rear wheels come off the ground, the brakes don't work. Now THAT gets your attention.
dbdartman
Platinum Member
Caption: "Gee, everything was going so well until I hit the brakes..." 
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
Another great reason to keep a loaded bucket low during transport. From the looks of it, his bucket had to be 5' or 6' off the ground?
johndeere_2320
Member
- Joined
- Jul 19, 2006
- Messages
- 41
3RRL,
That was my thought immediately when I saw the post, traveling with a load well off the ground, hit a dip and it flipped towards the front. If this is the case, be sure to tell your friend, if transporting weight to keep it very low/almost against the ground. Alternatively, if he had tried to turn with a load transporting it well above the ground, then the picture would have been of that new 2305 on it's side.
I sure hope he has learned a valuable lesson about the need for BALLAST
That was my thought immediately when I saw the post, traveling with a load well off the ground, hit a dip and it flipped towards the front. If this is the case, be sure to tell your friend, if transporting weight to keep it very low/almost against the ground. Alternatively, if he had tried to turn with a load transporting it well above the ground, then the picture would have been of that new 2305 on it's side.
I sure hope he has learned a valuable lesson about the need for BALLAST
