5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,997
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
What I did with my cabbed M9 actually but there is a bit more to the story as Paul Harvey used to say..
If you ever want to remove the loader, you'll have to install a set of couplers where the loader plumbs into the loader feed lines. I added a set of male and female Pioneer couplers (mine uses Pioneer QD's) so you can remove the loader. I used smaller diameter hoses I sourced from the local parker hydraulic shop. Ran them along the present metal loader lines.
Mine is for my power angle snowplow...
If you ever want to remove the loader, you'll have to install a set of couplers where the loader plumbs into the loader feed lines. I added a set of male and female Pioneer couplers (mine uses Pioneer QD's) so you can remove the loader. I used smaller diameter hoses I sourced from the local parker hydraulic shop. Ran them along the present metal loader lines.
Mine is for my power angle snowplow...
