I'm in a pretty bad fix update.

   / I'm in a pretty bad fix update. #1  

Shantycoke

Silver Member
Joined
Apr 6, 2007
Messages
180
Location
Appalachian Ohio
Tractor
kubota B7800, Kubota T1570
Went to the surgeon today, said the tear in my meniscus would never heal on it's own without surgery, and he'll deal with the torn acl while he's in there. So that's how I gonna spend my Halloween. On the upside, I will probably be off to spend Christmas with my beloved bride and wonderful kids.
That's one good thing to come out of this.
Pat
 
   / I'm in a pretty bad fix update. #2  
I feel your pain. I'm in my 9th week of post-achilles surgery healing, and the roughest part was being off my feet trying to get around on crutches and hobbling everywhere. I've only been walking, if you can call it that, for 1 week. On the upside, you do get a lot of quality family face time. (I tried not to be too big a PATA for her.) The wife was a great support during this time.

I'm sure you'll find afterwards that it was all worth it. Might be hard to see that right now. The other option being possibly being permanently crippled later on down the road...and that ain't much of an option.

Best of luck to you, and here's to quick healing!
 
   / I'm in a pretty bad fix update. #3  
On an up-note, the torn meniscus surgery, which I also had, brought immediate relief from the pain. Before surgery I really enjoyed running and had completed 13 marathons many triathlons and "K" runs. That was seven years ago and even though the Dr. said running would be out (and that was true the first year after surgery) I can still now do a decent (>9min. mile) 5k and I run a few miles every day.

Take your time recovering and be diligent with the physical therapy. Good luck!
 
   / I'm in a pretty bad fix update. #4  
Pat:

Good luck on your surgeries, please cooperate with physical therapy, and do not "push it" once you start to feel better (You do not have to ask why I am saying this
:(.).

Again Good Luck- Jay
 

Tractor & Equipment Auctions

30in.x57in. Welding Table (A49339)
30in.x57in...
2004 Ford E-250 Cargo Van (A46683)
2004 Ford E-250...
PENDING SELLER CONFIRMATIONS ON SOME LOT #'S (A45678)
PENDING SELLER...
Skid Steer Blank w/U Cut Out (A49339)
Skid Steer Blank...
Set of (2) Rolls of Woven Wire (A49339)
Set of (2) Rolls...
John Deere Z915B (A47307)
John Deere Z915B...
 
Top