Im looking for a Carry all to fit JD 2305 Imatch Quickhitch

   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch #11  
Did you look at the ones from Loogie's post?
 
   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch
  • Thread Starter
#12  
Loogie has a nice setup I like his It is awesome
 
   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch #13  
buy a frame for about 100 to 150 from tractor supply and then do as I did. look under attachments for multipurpose lifter. THis is easy to use and even has a seat for tractor rides.
 
   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch
  • Thread Starter
#14  
sounds like a good idea Thanks
 
   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch #15  
Kingkutter has a 3ph carry all that may work.
http://www.kingkutter.com/XBProducts.asp?XBProd=Carryall
but you'll have to correspond with them to learn the dimensions between pins.
When I bought my york rake, I insisted that it must fit my imatch. It didn't so they contacted JD for an adapter. JD said they were working on it. My dealer said heck with them, we can do it and they put some bushings on it. It fits now.
 
   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch #16  
The KingKutter Carry All I bought from Tractor Supply did not fit the John Deere I Match. I welded on some new tabs that hold the lower pins on - I think they needed to be raised about 2". I left the original tabs in place. Slightly reduces the amount of height I can lift the carry all but it works great. I made a deck out of some 2X3s and bolted the deck to the carry all with eye bolts.

I use it to carry my 25gal Fimco sprayer - eye bolts make it easy to strap it in place. Sprayer gets hooked to the switch controlled cig lighter receptical and then I have a controlled sprayer from the right fender panel. Also extended the spraying wand for spot spraying from the deck for weeds around teh landscaping.

Tractor is a 3320.
 
   / Im looking for a Carry all to fit JD 2305 Imatch Quickhitch
  • Thread Starter
#17  
BloomingtonMike said:
The KingKutter Carry All I bought from Tractor Supply did not fit the John Deere I Match. I welded on some new tabs that hold the lower pins on - I think they needed to be raised about 2". I left the original tabs in place. Slightly reduces the amount of height I can lift the carry all but it works great. I made a deck out of some 2X3s and bolted the deck to the carry all with eye bolts.

I use it to carry my 25gal Fimco sprayer - eye bolts make it easy to strap it in place. Sprayer gets hooked to the switch controlled cig lighter receptical and then I have a controlled sprayer from the right fender panel. Also extended the spraying wand for spot spraying from the deck for weeds around teh landscaping.

Tractor is a 3320.
Thanks For The Info
 

Tractor & Equipment Auctions

White Chevrolet Truck Bed (A55788)
White Chevrolet...
Self Dumping Hopper (A53316)
Self Dumping...
205028 (A52706)
205028 (A52706)
2012 CHANDLER 130 BBL STEEL VACUUM TRAILER (A53843)
2012 CHANDLER 130...
2017 FORD F250 SUPER DUTY EXT CAB SERVICE TRUCK (A53843)
2017 FORD F250...
42013 (A51691)
42013 (A51691)
 
Top