In a nut shell

Status
Not open for further replies.
   / In a nut shell #1  

roller

Bronze Member
Joined
Aug 19, 2005
Messages
64
Location
Suffolk England
Tractor
kIOTI CK30
Can someone tell me what kioti are doing about the front end loader cracking problem??
 
   / In a nut shell #4  
roller said:
So basicly nothing.

I don't think that is accurate at all.
From what I have read they are working on a fix. There has been a whole lot on this subject here on TBN. Take some time and read it all.
 
   / In a nut shell
  • Thread Starter
#5  
Ok tell me this has anyone here had there loader 'replaced' ? recalled ? ,over the last 3 years I have bought over $250K worth of machinery ,beleive me manufactures do not openly admit they got a product wrong,recalls are vary vary rare indeed!!!!

Now I need my loader,I use it commercialy my question AGAIN is what are you guys from Kioti doing to rectify the loader problem??
 
   / In a nut shell
  • Thread Starter
#6  
shvl73 said:
I don't think that is accurate at all.
From what I have read they are working on a fix. There has been a whole lot on this subject here on TBN. Take some time and read it all.

The hard facts are their are people out there still with cracked loaders!
 
   / In a nut shell #7  
roller said:
The hard facts are their are people out there still with cracked loaders!

Just a guess but, could be that it is taking time to determine what is a permanent and cost effective cure that can be readily applied to the units in service and to prevent the problem from resufacing on the re-design.
I suggested reading all the threads on this issue because I think you'll find most people are still able to use their tractors and loaders, with or without the problem.
 
   / In a nut shell #8  
roller said:
Ok tell me this has anyone here had there loader 'replaced' ? recalled ? ,over the last 3 years I have bought over $250K worth of machinery ,beleive me manufactures do not openly admit they got a product wrong,recalls are vary vary rare indeed!!!!

Now I need my loader,I use it commercialy my question AGAIN is what are you guys from Kioti doing to rectify the loader problem??

Wow, $250K? In three whole years? I'm impressed. (not).
Forget it, this thread is not worth any further response.
 
   / In a nut shell #9  
Roller, since you already own a CK30 do you have a Kioti loader for it? Do you want to buy a loader for it? If so, Woods currently makes a dang nice loader with no apparent cracking issues.

In a nutshell, the cracks are still waiting to be fixed by Kioti. I think you already knew that though.
 
Status
Not open for further replies.

Tractor & Equipment Auctions

2016 Hurricane Blo-Vac X3 Stand-On Blower (A50324)
2016 Hurricane...
2014 Gillig 31+56 Low Floor Passenger Bus (A50323)
2014 Gillig 31+56...
Test Button (A47384)
Test Button (A47384)
2020 FREIGHTLINER CASCADIA SLEEPER (A51222)
2020 FREIGHTLINER...
2018 INTERNATIONAL LT625 SLEEPER (A51219)
2018 INTERNATIONAL...
2014 Doosan DA30 (A52128)
2014 Doosan DA30...
 
Top