Industrial Engineer
- Thread starter osvaldo
- Start date
- Views: 431
Welcome to TBN. 
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 29,445
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I've been working a CAT D3 for the last 10 years... so far, it's been very reliable.
Welcome to TBN!
Welcome to TBN!
Last edited:
North West Farmer
Silver Member
- Joined
- Sep 10, 2011
- Messages
- 108
- Location
- 35 miles S.W. of Portland, Oregon
- Tractor
- Farmall 560, Farmall 400, Farmall M, International 606, Oliver 77, John Deere Backhoe-300B, Bolens H16, Farmall W6
Osvaldo,
I am also an industrial engineer by trainining and worked in that capacity in the foundry industry for seven years. Too much travel, became a fireman and am presently a retired fireman and full time farmer. I am new to the forums also, but have really enjoyed my time here up to this point.
I have already put to use several ideas that were presented on this group of forums and by golly, they worked.
Welcome aboard and hopefully you will find this resource to be as enjoyable as I have.
Nick, North West farmer
I am also an industrial engineer by trainining and worked in that capacity in the foundry industry for seven years. Too much travel, became a fireman and am presently a retired fireman and full time farmer. I am new to the forums also, but have really enjoyed my time here up to this point.
I have already put to use several ideas that were presented on this group of forums and by golly, they worked.
Welcome aboard and hopefully you will find this resource to be as enjoyable as I have.
Nick, North West farmer
Here are some similar links:
