Instructions to add extra spools to L2800 for grapple.
- Thread starter teg
- Start date
- Views: 50536
So I would know how to do it!!!don white
Silver Member
I just installed a 3 function on my B-26 and used the Kubota kit. 866.00 So it was 250 more in cost up front but I really like how the installation went. Everything fit and looks good. All mounting locations already had holes. Only had one leak cause I didn't tighten a fitting. About 8 hours of labor. Having the buttons on the FEL joy stick is real nice.
The kit had everything except the quick disconnect fittings.
The kit had everything except the quick disconnect fittings.
Did you write this up on TBN? or got photos? even if it's just the end product... Some of the factory setups are clean and nice looking... I wouldn't call mine either of those two terms.
Tony H
Platinum Member
Hmm, did we lose teh photos after a year? I do not see any PICS
Tony H
Platinum Member
Yeah, as you say, I guess the 'Path' changed so we lost it.
Too bad, I've been trying to convince my friend to put an Aux hydraulic on his 'Bota a pictorial may have sold him on it.
Too bad, I've been trying to convince my friend to put an Aux hydraulic on his 'Bota a pictorial may have sold him on it.
Paul Thornton
Gold Member
I just found this thread and was also hoping to find the pictures and diagrams.
It's been a while, shoot, I'm not sure I understand this any more :confused2:
Edit; Removed the first photo, it wasn't my photo... it had double handles.
View attachment 407753View attachment 407755View attachment 407756View attachment 407757View attachment 407758View attachment 407759View attachment 407761
Edit; Removed the first photo, it wasn't my photo... it had double handles.
View attachment 407753View attachment 407755View attachment 407756View attachment 407757View attachment 407758View attachment 407759View attachment 407761
Last edited:
Paul Thornton
Gold Member
Thank you for reposting the pictures.
Paul
Paul
graywarrant
New member
TEG -
Sorry to bring an old thread back to life, but this one is worth the trouble.
Wanted to ask if you still had the photos for the install that were posted? they have dropped off again from the thread when you last posted them.
If you still have them and don't mind, could you repost them or send them via email to me at graywarrant@yahoo.com?
Would really appreciate as I am trying to wrap my head around the mounting position for the spool valve. I like the idea of having it near the FEL valve and I think I understand what you did with the FEL lockout feature, but a picture is worth a thousand words and in this case, would save a lot of head scratching.
I am also in SC - near Columbia. I help maintain 400+ acres at a leased hunt club in Fairfield county and we have some land in western NC - our L3400 comes in handy.
Thanks -
Ray
Sorry to bring an old thread back to life, but this one is worth the trouble.
Wanted to ask if you still had the photos for the install that were posted? they have dropped off again from the thread when you last posted them.
If you still have them and don't mind, could you repost them or send them via email to me at graywarrant@yahoo.com?
Would really appreciate as I am trying to wrap my head around the mounting position for the spool valve. I like the idea of having it near the FEL valve and I think I understand what you did with the FEL lockout feature, but a picture is worth a thousand words and in this case, would save a lot of head scratching.
I am also in SC - near Columbia. I help maintain 400+ acres at a leased hunt club in Fairfield county and we have some land in western NC - our L3400 comes in handy.
Thanks -
Ray