Is there any harm in greatly increasing HP driving a hydraulic pump?
- Thread starter bdog
- Start date
- Views: 5509
Texasmark
Elite Member
- Joined
- Apr 24, 2012
- Messages
- 3,703
- Location
- N. Texas
- Tractor
- Ford: '88 3910 Series II, '80 3600, '65 3000; '07 6530C Branson with FEL, 2020 LS MT225S. Case-IH 395 and 895 with cab. All Diesels
That potential problem could easily be overcome one would think. I did it on a smaller setup.
WranglerX
Super Member
There are companies that specialize in rebuilding injector pumps... You can probably get it rebuilt for a lot less then having to purchase new....
Dale
Dale
kthompson
Elite Member
- Joined
- Sep 12, 2008
- Messages
- 3,509
- Location
- South Carolina
- Tractor
- Kubotas B2710, M6800, L6060 cab, Volvo EC excavator, 2 ZTRs and various implements.
Not sure his user name but there is a person here if memory is correct in South Carolina who does that per his info.
oldnslo
Super Member
Mark,
It depends on how the pump is mounted. If connected direct to engine then rotation is fixed vs being belt driven. Gear pump you can usually change rotation by dismantling the pump and reassembling in different orientation. Piston pumps not as easy to change rotation.