Is this worth trying to weld ?

   / Is this worth trying to weld ? #31  
Now since you are good at this... Take a piece of steel and cut and bend it to match the missing piece from the top pulley and weld it in.
 
   / Is this worth trying to weld ?
  • Thread Starter
#32  
Now since you are good at this... Take a piece of steel and cut and bend it to match the missing piece from the top pulley and weld it in.
I should do that yes, but first in line is a "shield" or some kind of deflector above the bre
aker because when the pile on the wagon isn't high it tends to throw forward
 
   / Is this worth trying to weld ? #33  
Congrats for giving it a go !! Nice job !!
 
   / Is this worth trying to weld ? #34  
I should do that yes, but first in line is a "shield" or some kind of deflector above the bre
aker because when the pile on the wagon isn't high it tends to throw forward

Is there a way to put the breaker into neutral and just walk the last bit off? Just throwing out ideas.
 
   / Is this worth trying to weld ?
  • Thread Starter
#35  
Is there a way to put the breaker into neutral and just walk the last bit off? Just throwing out ideas.

Unfortuntaley not on this type
 

Tractor & Equipment Auctions

2023 LMC M30018 LOT NUMBER 207 (A53084)
2023 LMC M30018...
Gravely 3000 RTV (A51573)
Gravely 3000 RTV...
IMPORTANT PLEASE READ!!!! TERMS AND CONDITIONS (A51573)
IMPORTANT PLEASE...
SWINGER 2K LOADER (A52472)
SWINGER 2K LOADER...
2023 JOHN DEERE 8R310 LOT NUMBER 202 (A53084)
2023 JOHN DEERE...
2004 20ft Explorer Pontoon Boat and Trailer (A51573)
2004 20ft Explorer...
 
Top