Iseki Forum

[Wacky]

Me too!:thumbsup: More information on my equipment, oh yeah:drool:

 

[DennisArrow]

guys......this IS the Iseki Forum of which they speak. If you look at the original post #1 it was started back in Jan. of '03 before this forum came into existence.... Somehow this old thread / public poll was bumped back into the present... So ask all your Iseki questions in this forum and there's lots of us to try and get you answers.

Bill

Bill.........RIGHT......I think the problem is that folks are so excited by their new seats that that part of the anatomy takes over and a failure to read kicks in............Dennis

 

[chiefcook]

I have a Bolens 2102 that I purchased new about 25 years ago. I keep 3 1/2 acres mowed with a rotary cutter and 450 ft driveway maintained with a 5 ft box blade. I do all my own maintenance and this forum has helped me thru the years. It also helped that I bought the bolens shop and part manuals with it.

 

[buddymay]

Count me in!

 

[Rollo13]

Count me in!

 

[pchearn]

Hi. I'm new to this forum. I own an Iseki TL2300. I've had it for several years. I don't really know anything about repairing it. I've changed the oil, but that's about it. I had it repaired a couple of times (nothing serious) where I bought it, but they no longer repair Iseki tractors. I have a frontend loader on it and it's not working right. I decided to check the hydraulic fluid, and discovered that I don't even know where to check it. There's a dipstick and a filler cap on the thing the gear shifter is on, but I don't know if that is hydraulic fluid or something else. Whatever it is, the dipstick shows it is very, very low. Can anyone point me in the right direction with this frontend loader problem? If this question needs to be listed in the Parts/Repairs forum, please let me know. Thanks in advance.

 

[xmariner]

Here, here - Late entry! I own a TU150FD with FEL and a few implements. Great little tractor.

 

[ki0ho]

I have a MF- 1532 whitch is made by Iseki I have been trying to find out what the Iseki mod number is but havent yet. Also trying to find a cross ref on the hydrolic suction filter the Massey part is real high cost . Hope this thread goes well for all Jerry:thumbsup:

 

[Kays Supply]

The 1531 uses a WIX 1268 hyd filter. The 1532 wasn't listed.

 

[Rustdust]

Landhope 155 here.