It’s here!

[CloverKnollFarms]

Ordered a couple inline restrictors from England. At this point I sort of wish the cylinder was US made, but it is what it is and BSP threads are all I have to work with. These are .031” orifice restrictors That I will install near the QD couplings. I thought about an adjustable restrictor, but read they can be tough to tune to such a small orifice, and they are quite large. That is a problem when having such limited space already on the back end. These should slow down the cylinder, eliminate chatter and be very compact

 

[Torvy]

Thought you might like to see this...the 'new' 5520. It has the TYM red.

 

[CloverKnollFarms]

Thought you might like to see this...the 'new' 5520. It has the TYM red.

View attachment 788571

Beautiful. I want.

 

[Torvy]

Beautiful. I want.

It was cool to see both types side by side. If you zoom, you can see they still have both old and new on the lot.

 

[ptsg]

It was cool to see both types side by side. If you zoom, you can see they still have both old and new on the lot.

Which one are you picking?

 

[Torvy]

I ordered a T574H.

 

[Torvy]

Now I have to figure out how to get it to my property. I can have a 3rd party they coordinate with do it for about $240. I might be able to rent a car hauler for about $85. Truck can tow 9900lbs. Tractor is right about 5000, a car hauler will be what, 2400? Box blade and forks are about 400 each. Total about 8200.

 

[PreacherM]

Now I have to figure out how to get it to my property. I can have a 3rd party they coordinate with do it for about $240. I might be able to rent a car hauler for about $85. Truck can tow 9900lbs. Tractor is right about 5000, a car hauler will be what, 2400? Box blade and forks are about 400 each. Total about 8200.

Drive it!

 

[Torvy]

Drive it!

It's 80 miles away.

 

[PreacherM]

Well that might be a stretch then. $240 delivery doesnt sound too bad considering you don't have a trailer. Unless you're going to make the trip anyhow.
Do you have straps or chains if hauling it yourself?