Oh , respect them very much but boy with AC and power it is so much easier. IT makes it even more impressive that they do it the old fashioned way. I know my father in law started off with a very small metal wheeled tractor out on the farm and now his son is still farming with the big Case stuff. This is my first foray into small tractors.
It has been decided and it is the PX9020PC
- Thread starter Tinstafl
- Start date
- Views: 20364
cat fever
Elite Member
Calling a 90hp tractor small makes one think twice, but in comparison to the really big ones I get it.
Looking forward to pictures of your future endeavors.
Looking forward to pictures of your future endeavors.
BlueToy1
Silver Member
What is that you're pulling? I haven't seen it before.
cat fever
Elite Member
It is a spring tooth harrow. The depth is adjustable by moving the wheels up/down to desired depth. Behind that is just old rod iron railing to smooth out everything for seeding.
Here's a little better picture.
Hooked up the woods 15 foot batwing. bW180 today for the first time. Wow that PTO shaft is heavy but it all connected well. I had to remove a spacer to get the proper cut height I wanted but boy that cutter and the PX are happy together. I did one field I 40 mins that took two hours plus on the ZTR mower. Tomorrow is the big field that used to take 8 hours plus in low grass and 2 -3 days in the heavy stuff. Then put on the box blade and pull downed branches and junk from the woods. Got a home pile of old metal already that the previous owner just dumped there. He was a contractor and would dump lots of stuff in the woods
Wakey
Veteran Member
- Joined
- Jul 7, 2013
- Messages
- 1,253
- Location
- Madison Georgia
- Tractor
- John Deere Z915B Zero Turn 54 Deck
If you were to shoot some video, I'd watch it ;-)
