It's heeere
- Thread starter TheSpoon
- Start date
- Views: 4981
stuckmotor
Super Member
- Joined
- Sep 23, 2009
- Messages
- 7,639
- Location
- Lower Up State S.C.
- Tractor
- AC WD 34 hp/3500 lbs MF 261 60 hp/5380 lbs
Congratulations, its purdy!!!
Bull Of The Woods
Bronze Member
WAY TO GO Spoon !!! What size is it?
roadhunter
Elite Member
Congrats on the purdy blue tractor!
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,663
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Congrats.
Your muscles and bones will be thanking you in years to come.
Your muscles and bones will be thanking you in years to come.
I ended up getting the 4046H.
Well, here's what I can say. I don't have anything to compare it to, so if it preforms better/worse than something else, I don't know.
I have not stalled the tractor at all.
I do know that in 2nd, with a box full of dirt, in 2WD I stopped the tractor (not stalling). Dropped it in 4WD and took right back off. In knocking down trees (probably 6"-8" in diameter) with the FEL, I was able to move the FEL without any noticeable loss of power (to the FEL or steering) while driving. I believe, that this has a lot to do with the dual pumps though? One pump for the steering and the other for the FEL/rear remotes.
Does that answer your questions?
In my short 6 hours of use it seems to be quite capable for what I want so far.
George2615
Super Member
Congrats on the new tool.
