Lawnjocky
Bronze Member
I saw a 10A backhoe advertised for sale and I was wondering how hard or expensive it would be to make it fit my JD3520. Is it even possible to put on my tractor? Thanks
Backhoe JD 10A Backhoe
- Thread starter Lawnjocky
- Start date
- Views: 2288
irwin
Veteran Member
Hi Lawnjocky;
With welding almost anything is possible. Get a subframe for the 3520 and fabricate mounting brackets for the backhoe.
The 10a might be a bit large though.
{disclaimer} I'm no expert, nor did I recently sleep at a Holiday Inn....
good luck....
With welding almost anything is possible. Get a subframe for the 3520 and fabricate mounting brackets for the backhoe.
The 10a might be a bit large though.
{disclaimer} I'm no expert, nor did I recently sleep at a Holiday Inn....
good luck....
rdln
Veteran Member
the 10a was the hoe for the 5000 series tractors. I would lt it go.
I had read that the 10A was for the 5000 and thats what I was concerned about. I didn't know if the back hoe was to big for my tractor. I wouldn't mind doing some welding if it will work when I'm done. If my 3520 doesn't have the size, flow capacity, etc, I don't want to waste a lot of time and money on the idea.
Thanks for your help
Thanks for your help
