3-Point Hitch JD 2140 levelling gearbox

[Jamiecookehants]

I have a 2140, with cab, which has a handle in the cab for adjusting the height of the right-hand link arm. This handle rotates a telescopic shaft, connected to a gearbox at the link arm end of the turnbuckle. This gearbox has completely jammed up, by the state of it the previous owner didnt believe in the use of a grease gun! Have had a good look at jdparts.com but can't find the appropriate part info.

Any help anyone can offer in finding the right part info would be brilliant!!

Jamie

 

[AKfish]

Welcome to TBN, Jamie. Great place, good people and reasonably priced advice!

Does this resemble the identity of your problem?

John Deere - Parts Catalog

AKfish

 

[Jamiecookehants]

Sadly that link just takes me to the search page. If you can tell me which page it's on that would be good!!

 

[Tx Jim]

If you go to the PC # 4185(I didn't see your SN posted on this thread so I guessed on a PC) and go to part index then insert L42055 or L31648 the correct page should come up with parts schematic. These are the 2 parts with the gears made on them.

L42055 LIFT LINK, RH ADD 300.00
L31648 SHAFT ADD 32.50

 

[Jamiecookehants]

That's it!! I was looking in the wrong section! Thanks alot for that. Next spare weekend I get I'll strip it down & see what the damage is like. Thanks for the help guys!!