5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Interesting and I will say that JD OEM parts are quite a bit more expensive (in this case) than Kubota parts. Had to replace my fuel cut solenoid on my cab M series tractor and it was 90 bucks at the dealer which I thought was a bit steep but they are listed on Flea Bay for about half that but the origin was questionable (probably Chinese) so I bought the OEM anyway.I purchase a new solenoid ($180) from the JD dealer and rushed home to install it.
My system is very similar to yours and I also replaced the diode which is located (on the M series next to the fuse block under the lower edge of the dash in plain view). Kubota issued a recall on theirs but mine was way out of warranty (like 10 years out so I just got a new diode from Digikey and replaced it as well. I will say the dealer price on it and what I paid from Digikey with shipping was very close in cost. Bought 2 to have a spare as I have 2 M series tractors that are identical (and both older).