3-Point Hitch JD 3038E Rate of Drop valve

   / JD 3038E Rate of Drop valve #11  
Two very interesting products as alternatives to the good ol' WD40 and CRC.

I'd hit it with a new penetrating oil called Blue Creeper. It is much better than Kroil, which is better than other penetrants. IMO

Never heard of this one but the fully synthetic aspect is attractive. Cool website where your mouse arrow becomes a bottle of product. :)

My favorite is Fluid Film, it does not evaporate quickly like the others do.

We have a local (From Australia) product (INOX) similar to FF, based upon Lanolin also. There are a lot of sheep in my country and Australia so we have a lot of Lanolin to use up.

Inox Supreme Lubricants - Inox Lubricants

CRC has been popular here for decades as has WD40.
 
   / JD 3038E Rate of Drop valve #12  
I'll back Spanner on the Inox products. I liberally use a rattlecan of 'Lanox' lubricant on everything that moves on my tractor (that doesn't have a grease nipple)... not the whole can, mind you. Just a spritz here and a spritz there. :thumbsup:

I especially spray my PTO shaft with it prior to attaching.
 
   / JD 3038E Rate of Drop valve
  • Thread Starter
#13  
Thanks for all the suggestions everyone. This is a great forum - glad I found it.
 

Tractor & Equipment Auctions

2018 Ford Fusion Hybrid Sedan (A56859)
2018 Ford Fusion...
2005 Chevrolet Colorado Pickup Truck, VIN # 1GCDT146258224098 (A57453)
2005 Chevrolet...
Misc Pallet of Gas Tanks, Transit Levels, Pumps, Bolt Pins (A57454)
Misc Pallet of Gas...
INOP/NON-RUNNING 1997 GMC T7500 Truck, VIN # 1GDJ7C1P2VJ505340 (A57453)
INOP/NON-RUNNING...
New/Unused Quick Attach Bale Spear (A57453)
New/Unused Quick...
20ft Jumper Cables (A57454)
20ft Jumper Cables...
 
Top