Sean022666
New member
Knowing that Bradco does not advise the use of a 485 backhoe attachment with a JD3320, could the 3320 support the weight and stress from a 485 mounted on a 3 point?
JD 3320 & Bradco 485 Backhoe
- Thread starter Sean022666
- Start date
- Views: 2480
-
- Tags
- john deere 3320
GreatWhitehunter
Veteran Member
Stay away from 3 pt hitch mounted backhoes. Especially on CUT's. Looking into the Deere 485 and I promise no other BH will compare. As far as hookup to the machine. The Woods would be a close second though not a slick to hook up I believe it specs a little higher.
Matt
Matt
OP
Sean022666
New member
Matt-
Got a great buy on a Bradco 485 BH but was told by Bradco that the 485 is not reccomended for my 3320....Just want to see if I can mount it by sub frame and that it will work...this is getting expensive.
I have a smaller ranch here in Montana, raise about 50 head of Angus and some horses for hunting and packing in so it would be light use just clearing ditches for flood irrigating each spring.
Maybe it wasnt a good buy!
Sean
Got a great buy on a Bradco 485 BH but was told by Bradco that the 485 is not reccomended for my 3320....Just want to see if I can mount it by sub frame and that it will work...this is getting expensive.
I have a smaller ranch here in Montana, raise about 50 head of Angus and some horses for hunting and packing in so it would be light use just clearing ditches for flood irrigating each spring.
Maybe it wasnt a good buy!
Sean
