JD 350 CRAWLER/LOADER/BACKHOE

[Bill Fortune]

about all I know about the valves is what I see in the manual dated Feb-67. It shows that when the neutral position the Functional Inlet is under slight pressure. It shows a Check Poppet between the inlets to the cylinders. If I have those Check Poppets then they must on the under side of the valves. I removed the two circuit relief valves and except for the fact they were not real tight, nothing is obviously wrong.
in the diagram the Anti-cavitation Check seems to be ported to the return to the tank and one of the cylinder ports.

I don't see parts manual (PM). is it via this site or email ? indust.consult@rcn.com

Was able to get about 1300 psi.

 

[Bill Fortune]

is that the PM you sent at 6:56 AM ? nothing like what I have. Maybe we should hold up here until I can get to Verizon and determine how to down-load pictures.

 

[Tx Jim]

PM=personal message which can be viewed by clicking on alerts(envelope symbol) above.

 

[Bill Fortune]

Ok, got the PM vial email; icon at top of page didn't work. Will call Monday morning or when I can. Have a service call Monday.