JD 4010 Fuel Injection Pump Issues

   / JD 4010 Fuel Injection Pump Issues #1  

Still8nn

New member
Joined
Jan 23, 2008
Messages
8
Location
Rual San Patricio County TX
Tractor
1949 Ford 8N (used most often)
I have a John Deere 4010 with a Roosa-Master Injection Pump. This pump has the governer built into the unit and the governer has broken apart and plugged the return line. After I clean out the return line, the engine runs fine again for awhile. My question is . . . Can the governer assembly be replaced without a complete injection pump overhaul? $:(
The pump only has about 500 hrs. on it since the last overhaul.
So far I have been unsuccessful finding replacement parts for this injection pump. Any info is appreciated.

Tom
 
   / JD 4010 Fuel Injection Pump Issues #2  
with only 500 hrs since the rebuild it should still be under warrenty, there is a place up here in canada where i get most on my parts for my ford 5600 and my kubota m8950 dt its a new and used tractor part place and it s called sexsmith used parts the nuber is 1 800 340 1192 but wont be open until tomorrow as this wekend is our labour day holiday i hope this works for ya .don [the bear]
 

Tractor & Equipment Auctions

2024 Cynergy Cargo 2 Enclosed Trailer (A53117)
2024 Cynergy Cargo...
2019 GENIE GS-1930 ELECTRIC SCISSOR LIFT (A53843)
2019 GENIE GS-1930...
2004 CATERPILLAR 140H MOTORGRADER (A51406)
2004 CATERPILLAR...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2 - BOXES (A53843)
2 - BOXES (A53843)
48 PIECE HEAVYEQUIPMENT KEY SETS (A53843)
48 PIECE...
 
Top