JD 850 (Yanmar) Internal Clutch Linkage Issue

[Niji]

Oh yes, you are right. Well, it's inside the tractor now. I just got everything back in place on the tractor and it works! I'm not fully pleased with the adjustment and I may tinker with that some more, but it does what it should, and dang those brakes are something since I get those cleaned up and properly adjusted while I was waiting on the clutch parts. Success! Thanks for the input, fellas.

 

[bmaverick]

Oh yes, you are right. Well, it's inside the tractor now. I just got everything back in place on the tractor and it works! I'm not fully pleased with the adjustment and I may tinker with that some more, but it does what it should, and dang those brakes are something since I get those cleaned up and properly adjusted while I was waiting on the clutch parts. Success! Thanks for the input, fellas.

Do you still have the old one then?

 

[Niji]

I do have what's left of it. I can dig it out tomorrow.

 

[careyo63]

Oh yes, you are right. Well, it's inside the tractor now. I just got everything back in place on the tractor and it works! I'm not fully pleased with the adjustment and I may tinker with that some more, but it does what it should, and dang those brakes are something since I get those cleaned up and properly adjusted while I was waiting on the clutch parts. Success! Thanks for the input, fellas.

Replaced both my Rear brakes and it is nice to have new Brakes. My new Ford 2 stage is working AIS and I think I'm going to start to use the L/R Brake pedals and see how well it does work for Sharp turns. The New Yanmar has a video of a couple of the models still useing that setup. Just seen it! Checked my Manual and it says that's what it is intended for. Plus FEL. no P. steering and my guess it going to help in sharp turns. And now knowing I can do that I be giving it a try.

 

[careyo63]

Had to think back but I reversed the Rear brakes Pads on my Yanmar 2000. Which I have 2 Brake Pedals on it also. I did some checking and had to look hard to find it. In my 195/240 manual I Found it with the L/R Brake pedal. It comes up in the Clutch Adj. section so it's setup like that also. Never tried the sharp brake turn on it but!!! I'll let you know. Has to be super sharp turning. No power steering on it and never had any need for it. No FEL..