Planters JD Planter Question

   / JD Planter Question #1  

TNhobbyfarmer

Veteran Member
Joined
Dec 23, 2004
Messages
1,185
Location
Middle Tennessee
Tractor
Kubota L3430 Polaris Ranger 500
I bought an old JD 246/247 planter. It's in pretty rough shape and I'm doing some rebuilding and refurbishing. The chutes in which the fertilizer flows through to the ground are metal spiral cylinders. Both are rusted beyond repair. I have seen some rebuilt planters that have plastic tubes that replace the metal ones. Are those available through JD? Are they possibly aftermarket replacements? If so, any ideas about where they can be found? Any ideas/suggestions are appreciated.
 
   / JD Planter Question #3  
Let me know what you find.. mine are in pretty bad shape too. Thankyou!
 
   / JD Planter Question
  • Thread Starter
#4  
kensfarm.........Shoup carries some aftermarket plastic ones, not too expensive, about $6.50 each. I assumed they were the answer, but after looking at the way they need to attach at the bottom, I'm not sure. Go over to ytmag.com and read a similar post in the implement alley forum to the one I posted here. There were some answers and suggestions that might be helpful.
 
 

Tractor & Equipment Auctions

PAINT ROOM EXHAUST FAN (A54757)
PAINT ROOM EXHAUST...
2015 John Deere 7700A Mower (A52377)
2015 John Deere...
Case Maxxum 140 (A50120)
Case Maxxum 140...
2008 Bobcat T190 Compact Track Loader (A55314)
2008 Bobcat T190...
2010 Chevrolet Tahoe SUV (A53424)
2010 Chevrolet...
2020 John Deere 450M Round Baler (A53485)
2020 John Deere...
 
Top