OP
danthefamilyman
Member
You'll probably have to cut a hole in the hood and let the engine stick out on that one!
Jima Y385T powered Mazda Pickup
- Thread starter danthefamilyman
- Start date
- Views: 42147
OP
danthefamilyman
Member
(I'm sure many would question why not a used Mazda engine vs. a tractor engine...)
If any of you are like me, then you enjoy finding out how much you can get out of your equipment. When I am running production machining jobs I enjoy finding ways to make the CNC mills run at the absolute maximum possible potential. On a large CNC mill it does no harm to the machine to run them that hard. (My last big CNC mill had over 8000 hrs of spindle time on it with no breakdowns!)
So when I was going to build a truck I wanted a commercial / industrial engine that should hold up to the same amount of "fun". That's the reason I did not go with a 'car' diesel.
Only time will tell if my selection was right. But so far the "fun" factor has been off the charts. Every morning I am just as excited to drive the truck as the first day I drove it. By far it has been the funnest project I have ever done.
If any of you are like me, then you enjoy finding out how much you can get out of your equipment. When I am running production machining jobs I enjoy finding ways to make the CNC mills run at the absolute maximum possible potential. On a large CNC mill it does no harm to the machine to run them that hard. (My last big CNC mill had over 8000 hrs of spindle time on it with no breakdowns!)
So when I was going to build a truck I wanted a commercial / industrial engine that should hold up to the same amount of "fun". That's the reason I did not go with a 'car' diesel.
Only time will tell if my selection was right. But so far the "fun" factor has been off the charts. Every morning I am just as excited to drive the truck as the first day I drove it. By far it has been the funnest project I have ever done.
OP
danthefamilyman
Member
I just put several new photos of the engine compartment and how it looks after 10k miles on "My Gallery". A little dirty but most everything is complete. I will be hooking up the A/C when it gets warmer.
Thanks,
-Dan-
Thanks,
-Dan-
Harrygoodwrench
Gold Member
Dan, real nice pics. Beautiful machine work and install. My compliments to you.
What year GMC is that in your gallery?
Regards, Harry
PS are you going to tell us how you balanced the flywheel? /forums/images/graemlins/wink.gif
What year GMC is that in your gallery?
Regards, Harry
PS are you going to tell us how you balanced the flywheel? /forums/images/graemlins/wink.gif
SPIKER
Elite Member
someplace I'm missing the photos of this gallery? wheres the link?
Mark M /forums/images/graemlins/tongue.gif /forums/images/graemlins/crazy.gif
Mark M /forums/images/graemlins/tongue.gif /forums/images/graemlins/crazy.gif
bruce1966us
Platinum Member
I understand that the AC can use 5-15hp. Will you use different size pulleys on the crankshaft and AC compressor? I changed my 06 Chevy from the OEM 8 inch crank pulley to a 5.75 aftermarket and picked up 2 MPG.
Paddy
Veteran Member
Dan,
When I was 21 I dropped out of the Uni-versity and bought 10 ac. I built a bansaw saw mill and cut the logs off the land for my timber fame house. Should have seen the reaction from fam & friends. I like projects like yours.
Remember, the Wright brothers took an engine and put it on a glider. Both existing parts
Patrick
When I was 21 I dropped out of the Uni-versity and bought 10 ac. I built a bansaw saw mill and cut the logs off the land for my timber fame house. Should have seen the reaction from fam & friends. I like projects like yours.
Remember, the Wright brothers took an engine and put it on a glider. Both existing parts
Patrick
Harrygoodwrench
Gold Member
Spiker,
I was confused too. I found the pics that Danthefamilyman spoke of. To tell the truth I never knew there was a photo gallery.
/forums/images/graemlins/confused.gif but I do now.
Go to TBN main(Home) page, click on photos on menu bar, Now you have to find out which category Dan put them, hint they are in "Property, Land & Lifestyle" photos. I did try a search many times for his name using the search option but to no avail. Maybe something I am doing wrong.
Anyhow, here is a direct link to save you time. Then click on next image to see next pic. Hope this helps.
Dans Pics on TBN
I was confused too. I found the pics that Danthefamilyman spoke of. To tell the truth I never knew there was a photo gallery.
/forums/images/graemlins/confused.gif but I do now.
Go to TBN main(Home) page, click on photos on menu bar, Now you have to find out which category Dan put them, hint they are in "Property, Land & Lifestyle" photos. I did try a search many times for his name using the search option but to no avail. Maybe something I am doing wrong.
Anyhow, here is a direct link to save you time. Then click on next image to see next pic. Hope this helps.
Dans Pics on TBN
RonMar
Elite Member
Dan
One thing that might be of interest to a lot of us here that run this engine in our tractors is what alternator are you using and what was involved in interfaceing it to the engine?
One thing that might be of interest to a lot of us here that run this engine in our tractors is what alternator are you using and what was involved in interfaceing it to the engine?
