Jinma 254 slow turnover

   / Jinma 254 slow turnover #41  
RAy,
There are two places for the leak to happen, if it is the rear seal, the oil will be coming from inside the bellhousing. If it is the gasket between the bellhousing and the engine block, the oil will be leaking from just in front of the bellhousing.

The bad news is to properly fix either will require the tractor be split, flywheel be removed and if necessary remove the bellhousing and repair the gasket/and or seal...

It is really not as bad as it sounds if you have a couple floor jacks some jack stands and maybe an engine hoist...
 

Tractor & Equipment Auctions

Bale Ring (A50515)
Bale Ring (A50515)
2025 72in Rock Bucket Skid Steer Attachment (A50322)
2025 72in Rock...
E-Z TRENCH GROUND SAW (A51244)
E-Z TRENCH GROUND...
Rears 1000 Gallon Orchard Sprayer (A50120)
Rears 1000 Gallon...
2002 International 9200i Truck (A52748)
2002 International...
1996 Ford F800 Rollback (A47384)
1996 Ford F800...
 
Top