derrells
New member
I have a 2006 224 and so far about 150 hrs. It has been a great little work horse using a 5' foot blade, rake and 4' brush hog.
Problems so far have been:
Hour meter clicking off the hours by the 100's in minutes.(replaced with off the shelf one from NAPA)
Decompression lever came loose from mounting.
Front axle seals leaking needing replaced.
2wd to 4wd lever hard to get into 4wd at times.
Muffler header pipe cracked due to vibration.( had to fabricate a better support for muffler)
Lots of tightening loose parts (to be expected)
Lots of misc oil leaks from fittings, plugs, etc.
For the money and size I would still recommend it only to the tool handy person.

Problems so far have been:
Hour meter clicking off the hours by the 100's in minutes.(replaced with off the shelf one from NAPA)
Decompression lever came loose from mounting.
Front axle seals leaking needing replaced.
2wd to 4wd lever hard to get into 4wd at times.
Muffler header pipe cracked due to vibration.( had to fabricate a better support for muffler)
Lots of tightening loose parts (to be expected)
Lots of misc oil leaks from fittings, plugs, etc.
For the money and size I would still recommend it only to the tool handy person.