John Deere 755 magnetic pto lever
- Thread starter thomgriz
- Start date
- Views: 916
-
- Tags
- john deere john deere 755 pto
Tinhack
Elite Member
- Joined
- Jul 3, 2020
- Messages
- 3,131
- Location
- Lytle, TX
- Tractor
- Ford 3910, John Deere 420C, Kubota G32XKS, IH 2606, Bad Boy Maverick-60"
Need a little more information than that. The lever just flops around, doesn't move at all, moves but doesn't engage the PTO, there is no lever? The possibilities are endless.
check the safeties again, especially parking brake and cruise control. once, i had trouble with the pto brake sensor slightly out of position. (if you have these features.) its electrical if you can force the pto lever into the engagement position and the deck spins up.
gstrom99
Veteran Member
- Joined
- Nov 4, 2015
- Messages
- 1,773
- Location
- Greene, Iowa
- Tractor
- Deere 855, Deere 530R zero turn, Allis Chalmers D17 III, Polaris Ranger, Deere 3032E (SIL's), Yamaha Timberwolf 250, Husky saws, H & H 10k and Carry-On trailers
There's a magnetic contact in there. I often need to push it up more than once to get it to engage. I've never looked into it further. Don't forget there's a front(mid)/both/rear pto lever control behind your left leg.
Last edited:
