This evening mowing my field I accidentally ran over a old rope with my bush hog. The rope tangled around the blade shaft, rapidly slowing it down. I was able to disengage the pto and free the rope. But after I stopped and turned the tractor off it will not turn back on. I have never had any starting trouble it before and can not see why it won't start now. I check all the electrical connections and they seem fine. I would appreciate any advice out there. Thank You.
John Deere 850
- Thread starter mnhwb
- Start date
- Views: 2766
-
- Tags
- john deere 850
Wolfy
Veteran Member
I would double check the PTO control.
Funny, I just joined here to read up on a similar tractor. This sounds very odd, can't see why it would not start. Are you going thru your usual starting routine?
In neutral or clutch in, set throttle to start, PTO disengaged, etc?
I've wound everything imaginable up in my brush hog, but never run across a problem like this.
In neutral or clutch in, set throttle to start, PTO disengaged, etc?
I've wound everything imaginable up in my brush hog, but never run across a problem like this.
Wayne_H
Gold Member
- Joined
- Dec 16, 2004
- Messages
- 380
- Location
- Davidsonville, Maryland
- Tractor
- John Deere 4400, '48 B and 318
where do you live? It will be quicker to get it from the local dealer. Order it tomorrow, you will have it Tuesday if it is not in stock.
Wayne
Wayne
JD755
Platinum Member
Have you looked on JD Parts? If you register you can check dealer inventory.
https://jdparts.deere.com
Kennyd has posted a tutorial for use of the JD Parts website here.
Picasa Web Albums - Ken Deckelman - JDParts Tutorial
