deereman10
Bronze Member
Would it be possible to use a flail mower or whirlibird mower whatever with a john deere B?
Mowing John Deere B with flail mower?
- Thread starter deereman10
- Start date
- Views: 2382
flusher
Super Member
- Joined
- Jun 4, 2005
- Messages
- 7,572
- Location
- Sacramento
- Tractor
- Getting old. Sold the ranch. Sold the tractors. Moved back to the city.
If it has a pto shaft on the tractor centerline and a 3-point hitch, sure. You may need to add a few hundred pounds of weight to the front end to balance the weight of the mower.
atgreene
Platinum Member
- Joined
- Aug 10, 2007
- Messages
- 868
- Location
- Sebago, Maine
- Tractor
- 2005 TB135 Excavator with Thumb, Quick Attach System, Ripper tooth, 3' Hydrauic Tilt Clean-up Bucket, Skeleton Bucket, 1986 Kubota 4150 with Loader and Quick Attach with Woods Forks, JD B, 1963 IH 504
You're pretty lean on hp with a B. Anything can be done, it's the results you may not be happy with.
John_in_TN
Silver Member
Which "B"? Early models would probably struggle with a 4' mower. Late models should handle a 5' mower.
Does it have a PTO? (Required to power the mower).
Does it have a 3-point hitch? If not, you could still use a pull-type rotary cutter.
