Just another junk chainsaw

[sd455dan]

Thats Canada stock.

No USA stock at Farmertec right now.

Got to watch it there. Have warehouses in China. Then USA, Canada and Australia warehouses too.

If in USA. Hockfire saws Scotty is a dealer south of me. He has the G2511 Farmertec ones for 99 too. But sold out.

He also has the V-modest one for 129 in stock. 6 left. V-Modest 2511

I got both and same saw different colors.

Scotty goes through the saws before shipping so no surprises like you get sometimes.

Another good thing he is here too and does warranty work for them. @Hockfire Saws

View attachment 5418707

Good to know,

Ordered the V Modest 2511 from Hockfire

THANKS XYZ

 

[sd455dan]

Wow just looked at the thread about the 2511 Echo saws, where you mentioned the pipe mod- once I get a few tanks through it going to build up a copy pipe for the copy saw.

That graph shows an impressive power increase on the real Echo 2511's.

 

[xyz123]

Wow just looked at the thread about the 2511 Echo saws, where you mentioned the pipe mod- once I get a few tanks through it going to build up a copy pipe for the copy saw.

That graph shows an impressive power increase on the real Echo 2511's.

Those clone ones come with a lot better muffler with small pipe already. IMHO no need for a Egan pipe or a PSS V2 cnc muffler on those clones in stock form.

I tested 3 out and those were 1 and 2.

They are mainly needed on the stock oem muffler on 2511. Stock oem mufflers are trash epa BS.

The clone muffler is good to go already IMHO.

 

[sd455dan]

Those clone ones come with a lot better muffler with small pipe already. IMHO no need for a Egan pipe or a PSS V2 cnc muffler on those clones in stock form.

I tested 3 out and those were 1 and 2.

They are mainly needed on the stock oem muffler on 2511. Stock oem mufflers are trash epa BS.

The clone muffler is good to go already IMHO.

View attachment 5441417

I forgot about how the china saws generally already have opened up exhaust, One less thing to need to do then.

Worked on the plastic case Husky 350's yesterday, one the darn decomp was stuck open on the closed port one and the other the top cylinder bolts had loosened - at least the modded mufflers are not falling off.

 

[xyz123]

Some pics of clone fully open smaller pipe muffler. The PSS V2 cnc one and Egan pipe. IMHO no reason to replace the clone muffler unless you go wild with porting one. Then Egan pipe #1.
I tried the WCS cnc one in this test and it was only better then the stuffed up oem muffler. So I wouldnt even waste my money on that cnc one.

 

[xyz123]

Pulling out some of my old stock 6 rivet tips for a guy wanting better back to the newer 4 rivet ones.

 

[xyz123]

Helping a guy in my group to modify the small husky flip cap for the use of oil cap on a 346.

I had used a goofy file which is no longer made between the threads.

I was able to match up a tiny 1/8" file I use on 1/4" mini micro. Hopefully works for him.

You need this and a flat file to mod them for 346 oil cap use.