Tiller kingkutter tiller

[Freds]

</font><font color="blue" class="small">( I found that the U-bracket that holds the end of the top link was about 1/8" too narrow to accept the top link ball joint. More work with a prybar and pipe/chisel to get that assembly done )</font>

I bought an extra toplink at TSC that wouldn't fit in whichever implement's "U" I was hooking up at the time. Now that I think about it, it may have even been where it attaches to the tractor where it wouldn't fit.... I modified the toplink's balljoint itself with a hand grinder and a cutoff wheel. It seemed like the least path of resistence.

I also had to add oil and grease my tiller, but the stuff I have boughten from TSC came assembled.

 

[Wall]

I bought a 72" KK tiller last year. Gear drive slip clutch and 6 tines per reel is kind of hard to beat.

 

[Wall]

Tiller Mod

 

[Freds]

Very nice, Wall.
Of course, some would say you're cutting your seat time in half. /forums/images/graemlins/tongue.gif

 

[Nasty135]

Wall, WOW now thats what I call double throw down /forums/images/graemlins/cool.gif Great idea...beautiful job.!!