RobertN
Super Member
I believe it was a Lansky. Was... I loaned it, and, well...
RobertN in Shingle Springs Calif
RobertN in Shingle Springs Calif
knife sharpener
- Thread starter winchman
- Start date
- Views: 6079
JJT
Veteran Member
- Joined
- Oct 13, 2001
- Messages
- 1,954
- Location
- Upstate NY, USA
- Tractor
- Kubota L3710 HST and a Kubota ZD21 60Pro
Take the time to learn how to use a set of stones and you will never go back to a machine. I tried 3 different sharpening/honing machines before I tried Japanese water stones, (800 - 6000 grit stones). The machines now collect dust in the shop. You get an unbelievable edge on chisels, knives, axes, etc. I suggest you touchup the edge up before it gets dull, maintaining the edge takes a minute or two, starting from scratch can take 30 minutes. The trick is to raise a burr, which is a slight metal curl you can feel with your finger nail, but cannot see, (use your finger and you''ll draw blood). Then remove the burr with the 6000 grit stone. No matter what you are sharpening, you'll be able to shave with it when you are done.
Bird
Rest in Peace
JJT, I think you're absolutely right, but not for me, 'cause as you said <font color=blue>starting from scratch can take 30 minutes</font color=blue>, and patience ain't one of my virtues./w3tcompact/icons/laugh.gif
Bird
Bird
