Kubota 3 point hitch won't drop down

[texasjohn]

The larger knob closer to the seat adjusts the seat spring tension...it is used to match operator's weight. Adjust it so seat seldom bottoms out when going over rough ground.

 

[imaginethat]

Yay! Five years after this thread ended it helped me to "fix" why my box scraper suddenly decided to not go down…or move at all.
It was "just" the speed control knob was turned all the way to slow (turtle symbol).
I eased it back towards faster (rabbit symbol) and now the box scraper and 3-point hitch goes up and down again.
Thanks to everyone who went before and helped solve this!

 

[Redlands Okie]

Ya these forums are sure handy

 

[Sporty]

Okay guys I have the same problem with a little twist. My seat hits on the arms when trying to turn. I can push down enough to get seat around to weight adjustment then no farther. The knob near the floorboard (open and close) came off on me and the metal bar seems to be just hanging there, not attached. I was able to put know back on but does not seem to do much. Any ideas on whats going on and how can I get the arms to go all the way down? Does have track-hoe attachment already on.

Thanks