Kubota B2650 PTO Selector Lever

[clemnd86]

I cannot switch my PTO from rear PTO to mid PTO. The lever is stuck/binding. I have tried engaging the rear PTO and then trying change the selector lever and still was not able to change to the mid PTO. I applied spray grease at the lever to loosen the joints and the lever is still binding. Any thoughts what is wrong?

 

[PAULWILKIE]

I cannot switch my PTO from rear PTO to mid PTO. The lever is stuck/binding. I have tried engaging the rear PTO and then trying change the selector lever and still was not able to change to the mid PTO. I applied spray grease at the lever to loosen the joints and the lever is still binding. Any thoughts what is wrong?

Not sue but it seams like there is a issue with the mech. Did it work before ?

 

[ruffdog]

Instead, use a penetrating spray where the shafts enter the case.

 

[Fxfymn413]

On my BX I had a loose bolt from one of the many brackets on the underside block the linkage.

 

[clemnd86]

On my BX I had a loose bolt from one of the many brackets on the underside block the linkage.

I cannot switch my PTO from rear PTO to mid PTO. The lever is stuck/binding. I have tried engaging the rear PTO and then trying change the selector lever and still was not able to change to the mid PTO. I applied spray grease at the lever to loosen the joints and the lever is still binding. Any thoughts what is wrong?

I took it to the local dealer he was able to get it unstuck and one of the linkages was bent that he needed to straighten. Working good now.