kubota b2650

Just got my old b2650 back from a relative after about 15 years and want to get it back in improved shape. Seems to work fine about 400 hours on it. When I push in the clutch when it is running it makes a clunky noise but works. Might this be a throwout bearing? If so what is involved with...

Okay so another "cool" deal I found on a B2650 but it doesnt have 3 point arms and drawbar. I asked my local Kubota dealer and he says $1500-$2000 to add them. He also forwarded me to Weaver's Compact Tractor for used/aftermarket. Worth pursuing ?

I am looking at a used B2650 from a dealer and it doesnt come with a loader. How easy(or hard) is it to add a LA534 loader to it ?

Hi I'm looking at 2 used Kubotas with same pricing $15900. First is a 2017 B2650 with 507 hrs and the second is a 2016 B3350 with 248 hrs. I have a 3 acre property and I believe(based on reading this forum) that the B2650 is more than sufficient for my needs. My question is how much can I offer...

I'm sure this question has been answered a million times. I have a 2018 KUBOTA B2650HSDC CAB TRACTOR that I purchased new and after starting it and for any reason shut it off it will not start. This does not happen all the time and the only way I can get it to start is having someone cross the...

My Kubota B2650, 2016 year suddenly shut down while driving along. Still have ignition redlight and glow plug light on dash, nothing else lights up I checked fuses and as many connections as ii could see/reach, all look ok. Will not turn over either. Any suggestions?? No i am not a...

Hey, I purchased a B2650 and while I was towing it home the cab roof blew off on the highway. Luckily the roof never hit another car or caused an accident. While loading the tractor and attachments onto the trailer and truck I never thought that I should have strapped my roof down to keep it...

howdy, i have a b2650 with a LA534 front end loader. i am getting mighty tired of almost rolling this thing daily when i have my front end loader on, (with and without my bucket). I have a belly mower, I am thinking of getting 3 inch front spacers... but then again, is 3 inches enough? I mow...

I have a Kubota B2650 with backhoe. I hadthe dealer add the third function for a grapple. The dealer set it up so that I have to use the backhoe connections to run the grapple. If I want to use the grapple and the backhoe at the same time, I have to connect all of the hoses together. It is also...

Kubota B2650 - 200 hrs Last week The tractor was running fine. I was moving snow for about 3 hrs, and it sputtered and died. Wasn’t out of fuel. I figured there could be moisture in the fuel so I changed it, changed filter, bled it at injectors, and new battery, still didn’t run. At WOT I can...

My neighbor has an L3901 and it's bigger than my B2650 no doubt. When I was attempting to look up the specs on it from TractorData.com, it shows my 2650 has a greater rear lift capacity. I'm hesitant to believe that. Anyone able to confirm? B2650 link L3901 link It says the B2650 is capable...

I have had a B2650 for almost a year now and love it. I saw a Facebook ad this weekend for a LX2610 that had all the things I knew I wanted in the future. The tractor had 37 hours, loader, backhoe, three backhoe buckets (6", 12", 24"), 3rd function valve, Landpride grapple, and a post hole...

I bought a used B2650 with a 60 inch mower deck it seems to work fine but today when i parked on a cement floor i measured the front of the deck and the rear and the rear of the deck is lower than the front. How do i adjust it? It looks like the two front wheels and the one dual wheel in the...

I have 291 hours on my B2650. Love the tractor. But recently, it has picked up this not starting thing. I go out to turn the key, sitting on the seat with the parking brake set, and the dash lights come on, but no attempts to turn over. If I wiggle the HST pedal forward and backwards, I usually...

I have a 1999 b7300HSD with a B2650 front mounted snowblower and I also have a LA271 front loader. The snowblower subframe is not the frame listed in the service manual and instead mounts between the sub-frame for the loader. This has created a weak spot in the snow blower sub-frame and...

I had posted to the forum several weeks ago about the fuel solenoid shutting the engine down when I tried to engage the pto. I was going to update it but could not find it. Anyway, I finally pulled the seat and other metal off to access the switch above where the pto shaft enters the trans...

If all you want is more HP is the upgrade worth it? I bog down mowing on the B2650 when i am out in the field mowing with it using the belly mower raising the deflector shoot helps. The grass is 5-8" tall and dry. Same with the a 5ft bush hog in tall thick grass that is as tall as the...

I bought a used B2650 with 200 hours on it. I am having issues with the mount of the mower. If i hook up the mower the way the book says the front linkage will lift the front on the mower deck off the ground and that is with the front link arm extended as far as it will go. It needs about...

Rear wiper blade on my wife's 2650 is falling apart, but OEM replacement is nearly CD$50! Can I just buy an SUV rear wiper blade of the same length?

By loaded i mean filled tires a snow blower on the back and a plow on the front. With the extra weight it seems to struggle going up a slight hill when in M gear with the implements up.

How do I tell if my wife's B2650 has a block heater? If it does have one, where would I look for the plug? Bob

I cannot switch my PTO from rear PTO to mid PTO. The lever is stuck/binding. I have tried engaging the rear PTO and then trying change the selector lever and still was not able to change to the mid PTO. I applied spray grease at the lever to loosen the joints and the lever is still binding...

Hello everyone. I‘be joined this group as a recent purchaser of a 2019 Kubota B2650 ROPS. The tractor has 330 hours on it and was a part of a package with a FEL, B2728B Snowblower, BH77 Backhoe, PFL2042 Forks and RB3596 Back blade. We’re in northern Michigan and primarily bought for 12 acres...

Title says all it's on flat ground but the grass is thick and over the hood of the tractor.

The right side axle bearing failed allowing the pinion to ring gear mesh to change and wipe a couple teeth from the ring/bull gear on the 2018 B2650. So while the dealer has it under warranty getting a newcomplete set of right side parts loaded, I decided to take trade value (always leans...

I'm wondering if anyone else has flipped the front tires side to side to widen out the stance? Everything seems to clear and it looks a lot better but didn't know of there have been any long term affects from doing so

So I got my backhoe installed on my Kubota B2650 a month ago. I am thinking about adding a rear remote to use when the backhoe is not installed. My question has to deal with the type of spool valve I need to get. I believe the tractor is an open center hydraulic system. Do I need to get an...

hi folks..those that were following my story of Kubota not starting..thank you all for your recommendations. I was always told...look for the simplest problem first.. well, i never do that :unsure: The nut that holds the safety switch on the bracket for the hst peddle came loose...the...

hi folks..those that were following my story of Kubota not starting..thank you all for your recommendations. I was always told...look for the simplest problem first.. well, i never do that :unsure: The nut that holds the safety switch on the bracket for the hst peddle came loose...the...

I'm considering getting away from my Husky 52" ZT and putting a 60" MMM on my B2650. I don't have a huge area to mow, and in fact much of it is better served by a zero turn because of all the obstacles. But it is too hilly for a ZT, and probably too hilly for a 2wd riding mower. In a perfect...

Hey guys, I’m having an issue and would greatly appreciate any help or advice. specs: 2017 Kubota B2650HST with LA534 loader. 632 hours. shortened version: If you lower the boom until it’s under pressure (hitting the ground), the FEL won’t lift. The problem is with the Boom lift...

I own a 2017 Kubota b2650. Been having problems with the neutral switch on the hydrostatic pedal. Tractor would not start until you jiggle the pedal about five times to vibrate the switch and then it would start. Figured I would live with it ‘til I could get it fixed this winter. First plowable...

I have a 2015 B2650HSD, front loader, 3 pt on rear, that I am planning on adding extra Hydraulics too. A few questions - do the kits from Landpride and Kubota come with any instructions? I am planning a third function on the front and dual Hyd in the back -- Messicks says this is possible...

I sold my B2650tlb and the new LX2610tlb will be ready this next week. I had “guessed” that the fel on the LX2610, LA535, would have more lift than the LA534 on the B2650. According to Kubota’s online brochures, I guessed wrong. Am I reading these charts wrong?

Hey folks, When greasing up the tractor, the manual indicates that there should be a zerk fitting on the treadle pedal where it mounts to the shaft, but for some reason, my B2650 does not have one. Is this normal, or did they forget to put that fitting on the shaft? My pedal stuck on me a few...

With the loader valve body cleaned and lubed, tractor warmed up, I find there's almost always a little "hump" to push the lever past, however firmly i hold the lever, as i move it left or right to operate the dump/curl. This results in the bucket or forks jumping uncontrollably at least a short...

Are the rear tires on a B2650 tubeless from the factory? I have a leaking valve stem and I was curious whether I just needed to pick up a valve stem or a whole tube.

My new LX3310 has the most annoying high pitch buzz/rattle from the hood latch at idle, i have tried for 3 days unsuccessfully to quiet it. I have pressed the mounting flange together a little to tighten it and take the slop out, I put a washer on the bar that attaches to the hood ornament that...

Hello, Recently inherited a B2650 Kubota with full enclosure. The only accessory is the 63 inch snow blower. Bought in 2015. The tractor has 55 hours on it and resides in northern Michigan USA. Can anyone help with a value Thank you

I met a guy that has a B2650 Kubota with cab & snowblower. The snowblower is 72" . After reading I have done this snowblower is by no means the right size for this tractor but the owner insists it runs fine. His driveway is pretty big and he has had it for 2 seasons already. I would have thought...

Mine is a HST and using a belly mower what RPM should you mow at? I've been at 2,300-2,500 if a little more power is needed.

Need to do an oil change on my B2650. There are 2 threaded caps on the top of the engine that have "oil" embossed on them. Are they both used for refilling the engine oil? Any advantage to using one or the other?

Greetings from a hobby farmer from Virginia Beach, VA!....TBN...Best resource on the internet by far.

Hi all, Has anyone replaced the air conditioner belt on their B2650HSDC? My belt broke and to reinstall the new one, it needs to go around the shaft going to the radiator fan. So it looks like I'll need to remove some parts to reinstall the new belt, but just not sure what the best or easiest...

The Kubota website is finally listing retail prices on the LX series (build my tractor). When doing a comparison between it and a similarly equipped B2650 the dollar difference is a bit over $1000 between the two, which is understandable since the LX is the latest and greatest. The question...

I was running my B2650 with rotary cutter this afternoon and ran into an overheat scenario. It was very dusty where I was working in a field, I as taking down some saplings as well, maybe 3 to 4 feet high. I assume it overheated due to radiator getting clogged up, but not sure right now...

I have been using Shell Rotella T6 15-40 in my 2650 since the first oil change. I haven't been able to get 15-40 in quarts only gallon or 2.5 gallon sizes so when I do an oil change I always have oil left over. I change oil roughly every year to year and half. My local O'Reilly's has 5-40 in...

Hi all, I'm looking for a front snowblower for my B2650 cab. I realize the B2782B 63" version is a better match for my B2650, but wondering if anyone is running the 51" B2781B version and if it wide enough? I know the 51" is also recommended for the B2650, but I believe the width of the rear...

Long time member,not many posts. I want to upgrade my 18 year old Bx22 to a cabbed tractor. Was looking at B2650 or 3350. The B3350 was a no go due to history with emission problems. The Lx looks like feasible option. Either of the 26hp tractors have me concerned with the loss of horsepower with...

Like to hear your pros and cons on B2650 with front loader rear tire chains and loaded tires. Tractor use will be light dirt work and some snow removal. Thanks.

(Prospective buyer) Does the B2650 have glow plugs? And if so, how are they activated for pre-startup warmup? Thanks.

After some trial and error I finally came up with a mount for the light bar that I think looks factory. Started with 1x3 square tube, 17"x6.5" 1/8" steel plate for the amber light mount and a few small steel 1/4 inch brackets (scrap I had laying around) to mount to the ROPS. Overall length was...

Was out snow blowing with front blower and put pto lever in off position , blower stopped , got off seat and tractor stopped and wouldn't restart when i got back on seat . I had to play with the pto lever several times to get so it would start up again . Is there a safety switch on both the pto...

I had a 2012 Kubota L3940 that I recently sold so I've been on the looks for a new tractor. I have will be using it to maintain my driveway it's pretty long put in about 1 acre of food plot. I will also be doing other things around the property. The l3940 was simply to large tore my yard up with...

I need a smaller tractor bigger than a BX on my 40-acre homestead and out on the farm. The BX's I have use have too little ground clearance, tires are too small for a pasture, and they lack torque to pull any descent grass load mowing my front yard with a 54" deck. Primarily, I'm debating a...

I bought a B2650 this year with a loader, mid-mount mower and a snowblower. The snowblower has the hydraulic spout rotation. The manual to the blower says like I was expecting, that up and down is just like raise and lower on the loader (front to back on the joystick), and the spout would swivel...

I did a video showing what you need and where the parts are to easily adjust your HST pressure to the loader circuit. I had been asked multiple times to do this, so I was tweaking mine and made a simple video that helps those without the work shop manual. Kubota B2650 / B3350 Loader HST...

Hey everyone. I had some hydraulic work done recently on my B2650 and since I got it back the idle speed sticks too high after being at high idle speed. It self corrects itself after a few minutes or after I reduce the loader load by setting it to float. If I throttle her up to 2000 rpm or so...

As expected, the new LX3310 is common rail injected. This should eliminate the regeneration issues that so plagued the B3350. Cab models have LED work lights and optional air ride seat. Both models offer single lever FEL hydraulic connections. Quick connect front hitch similar to BX models...

I have been having trouble with the safety switches on my treadle and also the seat switch. With the PTO's disengaged it will kill the engine if I go up or down a grade or even shifting my weight on the seat. Then the treadle got off center and that would make starting it a real PITA. It died...

I've got a year and a half old B2650 with just under 400 hours on it. Last Thursday I heard a metallic ringing sound, so I opened the hood and restarted the engine. I found that the weld on the outlet side of the muffler broke 360° at the muffler body to stub toe of weld. I contacted my dealer...

Today my wife decided to bush hog the back pasture while I was doing some welding on her father's trailer. She will not back it up, but she mowed about half of the 5 acres. I posted pictures of her on FB and of course I got some A hole who said that he "wanted to see the bush on that hog". I'm...

Finally sold my BX23. Thinking about ordering its replacement tomorrow or early next week. The plan is: - B2650 HST ROPS - FEL with SSQA, 60" bucket, LP forks - Third function for future grapple - 60" mid-mount mower - Backhoe with 16"bucket - R4 tires Debated between R4 and R1 tires; like...

I have a clean 2014 L3940 hstc with loader has full cab with heat and ac I did a even trade for the tractor for my skid steer. I own 8 acres and would do light loader work and maintain my driveway which is about 500 feet long. I just dont have enough background on tractors. I am thinking about...

Trying to check my radiator fluid level and i can't get the radiator cap off!! You turn it it releases but will not come off. I'm scared i could brake off the radiator top since it is only plastic. Should i just force it, usually they have two tabs that hold it on maybe they are bent in to much.

Got tired of cleaning soot off FEL from engine exhaust stream. Made the following mod: Cut off about 1.5" of existing exhaust pipe (after removing spark arrester @ end); Cut down a standard 1 1/4 EMT prebend conduit as necessary; Drill tap a couple of new holes. Problem solved. Total cost...

I have a newly paved driveway and need to get a cabbed tractor ( still wrestling between a B & L series ). I want to know if the smaller B2650 would make it up this hill which has a 16 degree grade. I would have the turf tires, and hoping to not have to use any rubber chains if possible. Just...

Small question is there a fuel shute off valve before the filter so you can turn off fuel when changing filter . Or do you have to train the tank.

Guys, I know that there's been a million questions on R1s, R4s, rim sizes, etc and perhaps i can help. Due to a small mixup in shipping, my new B2650 arrived with R4s on it when I ordered R1s. The dealer send me home with the R4s which I have had for about two weeks now. I just got word that...

Guys, I purchased a new Kubota B2650 a few weeks ago and immediately installed an upgraded alternator to replace the under-powered dynamo. I took some time to create a how-to video and I finally had a moment to edit up the video and post it to Youtube. Here it is:

Guys, Do any of you have experience with the pin up procedure of the MMM to hold it up while using the 3 point??? I tried to do it, and quit after about an hour of twisting, reading, and cussing . My conclusion at that point was to just leave the MMM mounted since this particular 3 pt job...

Hi - My previous Kubota B7500 hst with non-foldable Rop I had for 18 yrs. I kept it in my garage which has a standard 7' x 9' garage door. I could have left it outside but the kids in the neighborhood would often play on it or fall from it, so I ended up storing it in my garage. I am looking...

I've been reading analyzing and test driving tractors in my area for the last year. For my uses and what I consider a comfortably sized machine for me and my purposes, I want to buy a B2650. However, I have one task that I have concerns as to whether I will be able to perform with it. I...

One of the jobs I want my tractor to do is pull a 5,000 lbs (29 Foot) travel trailer into the woods to our camp site in the spring/early summer, and then back out in the fall. Slight grade to the property, but no big dips or slopes. Everyone seems to say that the L3901 is better sized for that...

Guys, I know that the B3350 comes with larger, wider R4 tires than the B2650. My question is, are all the other tire options such as the R1 also larger on the B3350? I am also curious to know what the cost is to upgrade to these larger tires when purchasing a new B2650. I have seen multiple...

Guys, I have 13 acres of mostly woods and just enough grass for a push mower (no tractor mowing needed). The property has lots of water issues and trails that need constant maintenance. I also have 200 yard long, crushed limestone driveway with a large parking lot like area near my garage I...

After looking and with a lot of advice from this forum I went with the 2650. Tomorrow I'll put her to work.

I'm looking for some advice as I'm looking to pull the trigger on a new tractor purchase this weekend. The main task will be finish mowing 10 hilly acres, then some occasional brushhogging and loader work. We currently have a bx1500 and bx25d that take care of mowing task at this property as...

Been debating for some time now between a B2601 and a B2650. Currently have a BX23 that I use for mowing, loader and backhoe work, nothing else. But I'm finding I need more ground clearance, more of a traditional tractor stance (my BX gets muck absolutely packed all around the rear end every...

Just recently ordered a B2650 open station, 60 inch bucket, the BH77 backhoe with 16" bucket and thumb, 63 inch front mount snow blower, and some PFL3048 forks since apparently they were cheaper than the 2042 I had originally requested. Hoping to use it on a little over 10 acres. Have about a...

Spent some time looking for a small utility tractor and decided on the B2650.Took delivery yesterday afternoon. So far it looks like it will fit what I need- spent some time in the wood yard with it this morning before the mud thawed. I do need to spread the rears a little. It's a little tippy...

Was looking for a way to get a bigger bucket whit out going to big .Saw this on and had to make one of them spill gard I love to fabric my stuff I hate paying for shipping and waiting .This is what I made today in about 5hr . I try it out it works great to and looks like a beast lol .

We added mods to my B2650 today to help protect the underside as much as possible since we are in extreme conditions (Post Hurricane Michael Cleanup) I don't normally talk on videos so excuse my shaky voice and flubs :laughing: Kubota B2650 mods - YouTube More info on the mods: HST...

I want to replace my 1969 David Brown 780 that I've been using for nearly 20 years mostly for snow removal using a five foot rear snowblower. The DB 780 also has a FEL. I have only just begun researching replacement options so I welcome suggestions. My wish list for a new tractor includes...

We traded my B2601 for a cab B2650 a few weeks ago. Already had to do the 50 hour service........ I have worked it HARD. Hurricane Michael cleanup is wild. I LOVE my B2650! Take a ride with me while I do cleanup..... we will also watch PSDStu as he digs up rootballs etc.. with his Kubota...

Am looking to by a box scraper I see every one using a 5 foot wide on the b2650. Is a 6 foot to big for a B2650 or not .If you get a 6 ft that is the same wait as a 5 foot is the 6 ft still too much for a b2650 . Also looking at a 5.5 feet Walco .What do you have on your b2650 and how it...

I have an old 60" rotary cutter with issues that was given to me with the property and rather than put money in it I think I'd rather buy a new one but I know very little about them. It will be primarily be used for mowing down some small fields once every Fall. I don't need heavy duty, probably...

Hey guy am trying to find the number for this pump .One of the valve was not working so I found out it had water in it and was frozen so I used a heat gun and it working now .Am just trying to find the manuel for it to see if I can undo the lower cylinder to get the water out. Number I got on...

Anyone know what BCI group size will fit a B2650? Looks like group 51 to me.

My rear pto located up when using for the first time since last winter by locked up I mean I engaged the rear pto then it just locked up and killed the tractor after it was spinning for a few sec. Now there is a leak around the pto not exactly sure where. I also seen a little puff of smoke from...

My seat spins side to side on my B2650. It doesn't move a lot, but enough when you are riding it that it is irritating. Is there a way to tighten it down? I looked and all I see that holds it is a hook in the rear.

Only 70hr one of my bucket top cylinder pin is very lose is this normal. Try to see if it just the pin or the cylinder hole that has used up. Any one else had this happen am going to call my dealer see what his thinks about this .

So I blew a fuse hooking up some external lights and bought a box of new fuses but they are larger. I'm guessing the B2650 uses mini blade.

Did a search there a lot of post about adding lights to a B2650. I'm looking for some type of mount so i do not have to drill into my ROPS, i don't have any scrap laying around or anything to use. These are the lights i was going to buy. With a light bar i don't know how much you can aim it...

Is there a reset button for the oil reset light on the Kubota B2650? The oil pressure light came on. Oil is at the correct level now Do we need to turn off the light...or look for something else being wrong? Be gentle - I am very new to this!

Anyone else have there battery die in only 3 yrs? Mine still works but it's slow to turn over the motor. No way it will work once it get's cold. I keep a trickle charger on it in the winter.

If someone here has an L4701 with the BH92 Backhoe, could you tell me how high the top of the BH92 is for travel/parking? I'm trying to figure out how high of a garage door I would need. Would also like to get the same info for a B2650 with the BH77 Backhoe. If you could also let me know what...

Has anyone bought an old sickle mower and put it on a newer compact tractor? I would like to find one to put on my b2650 to mow along the creek banks where it is to steep for a tractor. It looks like belt drive is better than pitman arm since I need it to be down at an angle. I am looking for...

Is there a kit from anyone to add hydraulics and hardware for a complete top and tilt kit for my B2650? Or do I need to piece and part a kit together?

I mow my father in laws 4 acres every 4 weeks or so with my B2650 HST, and instead of trailering it 4 miles I just drive over and do the job, and drive back to my home after. It takes as long to load and unload from the trailer as it does to just hammer down in high range and drive there. On...

I am planning on buying a Kubota B2650 ROPS, for the life of me I can't find any pictures of how the hydraulic valve, levers and couplers are mounted. I can find pictures of just about every other thing imaginable on the internet, some a little racy I might add! Is there anyone on this site...

I've got 120 hrs on mine and the filter is dusty do you guys wash your filter or simply blow them with compressed air? I have been using compressed air to clean off the radiator from the inside where the fan is.

I've noticed this only 2 times in the past, in cooler weather, while working the tractor hard. Normally if I stall it out while consistently keeping the engine under a heavy load and bogging it down it will re-start immediately. 2 times this spring it scared me a little as it would light the...

Just took delivery of my B2650 on Friday. I spent a lot of time and research before landing on the 2650 and am very happy with the tractor and it's abilities, think it's going to be perfect for me. That said, a few things with the tractor upon arrival disappointed me a little and am wondering...

My book says to change the engine oil at 50, 200, 400 hours and so on. Messicks says 50, 100, 200, 300. Who is right?

I'm considering the B2650 as my first tractor. We have a few acres of flat open terrain, 2 acres used for horse pasture. Also looking at a Kuhns compact 205 hay grabber (4 small squares, flat Or 5 bales on edge) to help with unloading tasks. Probably go thru around 400 small square hay bales...

I have a 2650 with 10hrs on it. When I got the tractor, I was using a front mount snowblower on it. When I would scroll through the display to get to the mid pto screen, it would display pto speed at 540-560rpm. Now when I am using the mid pto ONLY, the rear pto screen displays the pto speed...

It's my issue related to the size of the mower deck, or the slope of my yard? I'm pondering selling/trading this FDR2572 for a 60", but if I'm not going to see a serious change in performance, I'll just keep this 72". Please watch the video. Kubota B2650 with Land Pride FDR2572 in steep slope...

B2650 HSDC turf tires w/ extended warranty. 190 Hours. Purchased 2016. Extra set of AG tires on the rim. BH77 Backhoe B2366 Quick Coupler LA534 FEL/B2356 60" bucket B2376 Forks B2741 Male Quick Hitch B2782B Snow Blower B2775 Front Blade Looking for reasonable offers

A while back I posted some pics of my tool - chain box I fabbed up that mounts in the existing holes on the loader frame. Recently I had a guy PM me about making a set, left and right for his new B2650 he had on order. His new B2650 is actually set up exactly like Larrys with back hoe and...

A neighbor is asking me about removing some white oaks that he had cut, he wants the root balls removed, not ground down. I implored him to call in a tree grinder guy, but he says that he's done it before and it brings insects and eventually sink holes. He is dead set on digging the balls out...

Hi guys, first time posting to any sort of forum & I have a few questions and concerns regarding a particular tractor (B2650) . I can't find a "hands on expert", aside from all the dealers who claim their machine is superior, to give me some honest feedback. I am pricing a job to snow plow...

I have been wanting a rear view mirror for my tractor. Looking at what most people did, the most common place to mount one on a rops machine if the front loader frame, which is a good place except when you take the loader off, you loose your mirror. I use mine quiet a bit with out it mowing and...

The question... I saw no mention of an HST screen like what my old BX25D had in the rear axle hydraulic system. Does the spin on suction filter replace that screen, or is the screen there and eluding me? What I did: Yesterday I was at 48.7 hours, so I pulled the tractor into the shop and did a...

Got a new tractor b2650 like to instal a radio cd player am looking for the wire diagram for the plug.If any one can help me out that be great

I've got a line on a really nice (used) FDR2572 finish mower a couple hours away and I made the deal to go pick it up tomorrow (Friday) evening. My only concern is that I side slope mow my property on a 16ｰ angle and I'm wondering of a 720 LB 3 point mower may try to man-handle the tractor on...

Have any of you B2650 owners had a problem with the PTO gear selection? My new machine (10 hours) has three selections....viz, Rear PtO only, Mid PTO only and both. Currently my shifter is stuck in a position that runs the Mid PTO and the Rear PTO simultaneously. The dealer field...

I'm still doing research etc, but leaning toward purchasing a B2650 in the next month or 2. Clearing thickets off a couple acres of our 10 is a priority and I'm thinking I want a grapple. Just wondering the best way to get it done. Is the 3rd function from kubota the only thing I need to...

Woot - I just signed up for a new B2650; should be available next week.. I've been waiting for a deal as good as I saw last June and I didn't quite get there - but very close. B2650 & 60" quick disconnect bucket & 72" belly mower for ~$20.6K (before tax - ugh). I plan to get a set of forks...

Well I decided on some Duo H chains for the B2650 and put them on today a don't have enough clearance. So obviously I need to get rear wheel spacers, anyone know what exactly I need to get? Also is installation something that I can tackle or do I need to take it in to the dealer?

I was moving some brush around the property today. I ran over a small stump (the stump was free, already dug out) and it struck the suction filter. A few minutes later I noticed fluid puddled on the ground. I headed for the garage but the tractor stopped and would not move so I shut it down. I...

Looking at getting chains for the B2650 as using the fel for snow removal. I have the AG tires and worried that ladder style will get lost in the tread? Any recommendations or experience would be greatly appreciated. Thinking possible going with a Duo grip h pattern?

I have the WSM for the machine, but if it ever discusses the amperage/wattage availability of the charging system, I'm missing it. I'm trying to learn what the charging system puts out, and what is available for me to consume with the addition of NiLight LED lights. I'm looking at adding 4 x...

Hi Everyone! I don't post much, sorry! Not even sure if the photo's I attached are going to show because I don't know if I did it properly? Guess we'll find out. I have a new B2650 and may purchase some pallet forks for her this week! I am wondering if anyone who owns a B2650 uses it with forks...

I made a quick video taking about my new 2018 B2650 TLB. If you have interest, check it out and comment. 2018 Kubota B2650 initial review and thoughts. - YouTube

I bought my B2650 6 days ago, and 4 days ago I removed the backhoe so that I could mount the 3 point "stuff" and hook up to my 72" rear blade to play in the snow. So, the snow has passed and I wanted to get the backhoe back inside the warm garage and not laying out in the UV and moisture. So...

I have a 2016 B2650 cab model. Today I noticed this bracket under the dash on the right side of the steering shaft. It has a couple holes in it like it is supposed to hold something. Does anyone know what it is used for?

The Sunshade is $437 vs the Deluxe Fiberglass is $322. What are the differences, I do not have pictures in the "Build my Kubota" page to help me decide. I think I want to call the dealer this week while they are building the tractor and add one of the 2. Is one better than the other for some...

I may not survive the next 7 days! My B2650 is officially in the garage at M&R Kubota in Butler, PA. To begin the build. This is a B2650 with 60" loader and 3rd function for a grapple, backhoe with 16" bucket and thumb, Kubota wheel spacers, the fancy-pants upgraded 3 point stuff, and the big...

Okay I am having issues and the dealership has not been able to figure this out either. I have a Kubota B2650 and Snow Blower B2781B. There is a bolt in the side of my PTO gear box that is used to provide tension on the sprocket to keep the chain tight. And it keeps breaking. I had this happen...

I am looking for the options of installing a snowblower on the B2650. I have the fel with quick attach and front hydraulics and the BH77. The cheaper of the options will be a 3 point but I have been used to running a front mount on small John Deer Garden Tractor. Will have to remove the back hoe...

Good morning, I'm having a major issue with my 47" front quick attach snowblower. It appears the right auger shaft is not engaging inside the gear box? Due to the age of this blower I'm wondering if it is worth trying to repair or look at moving to a larger snowblower for the kubota B2650? I do...

I am putting together a deal on a new B2650HSD TLB unit. The deal is breaking down as follows: B2650HSDBase Price + R4 Loaded $16652 LA534A Loader $3208 B2366-MECH Kubota SSQA Kit $432 B2356-60" Light Material Bucket $559 B7308A-3RD 3rd Function ROPS mounted $799 BH4962 Backhoe Subframe Kit...

I have been going to put rear remotes and run lines up to the front loader and run off of one of the remotes for a while now. Being a retired heavy equipment operator, my Kubota dealer, who I have become very good friends with asked if I would do the site work for a new storage building for...

I was doing my 50 hour service (a little late) on my tractor today. I pulled the plugs on the oil pan and while I was waiting for the oil to drain I grabbed the hanging w/strip off the bottom of the hood and took a good look at it. I decided to get out my w/strip adhesive and run a bead of it...

Thursday I took deliver of my Kubota B2650 to spec. I posted it when we were shopping but here's the list again: B2650 w/cab Carl SR Bias Turf tires Wheel spacer kit 1.5" (just for stability) BASE KIT AND FIRST LEVER 2ND STACKING KIT & 2ND LEVER (for two rear remotes) Remote...

The question is how big of a step up is it in loader/backhoe digging ability when moving from the SCUT BX25D to the CUT B2650? My primary use is finish mowing lawn (2.5 acres) and then the other use is digging virgin dirt from one spot to fill or transition to another spot for landscape reasons...

I got the bug to upgrade from my BX25D to something with some more capability. I have owned the BX for almost 4 years and put on almost 400 hours. It has been handy but I want something that can do a little more. What I use the tractor for and where I use it: I have 4 acres of wooded PA ground...

Just picked up a B2650 today. Open station, FEL, SSQA, 60" bucket, Turf tires, One rear remote, quick hitch. Bought it from Burke Equipment in DE for 18600. I thought this was a pretty good deal. I was looking to replace John Deere 750 2wd, gear, no loader, no power steering, without go...

Changed oil and filter and was checking fan belts etc. and noticed a v cut in the lower coolant hose which was quite deep and caused by the belt as it would chatter a bit at idle speed and hit the hose . The belt was tight but the hose set up right by the oil filter is a lousy one on the cab...

I decided to till the garden today, so I installed my tiller on the back of my tractor, pulled out of the barn, and into the garden. I backed up to the far fence, grabbed the PTO handle to slide it back to Rear PTO, and no matter what I did, the handle would not move. After straining for several...

Greetings. We own 5.56 acres of ~1acre mixed Tree's (LOTS of deadfall), unused pasture ~2acres with the mixed trees, and remaining lawn and buildings we are looking to maintain. Also being in Alberta, we get some wicked snow. Previously I've used "ride on" mowers from craftsman, Bolens, and...

Hello, I'm in the market for my first tractor and I'm hoping to buy the correct one. I have 2.67 acres that I'm going to do stump removal, building gravel trails, snow maintenance and landscaping in Nova Scotia. It's quite rocky where I am as well. I'm a bit torn if I should get the B2650 for...

I am nearing a decision on my first tractor for an 11.5 acre (flat, 10% lawn 90% meadow, .25 mile gravel driveway) property I purchased. I plan to get FEL, MM or finish mower, brush hog, grater or box blade (need to decide which I need), and snow plow (or rear blade if I feel cheap). I have...

Ok so i get a quote from my local dealer(60miles away) on a b2650 cab with 60"QA bucket , loaded R1, wheel spacers, 3rd function valve, landpride 1260 slipclutch bushhog,48" fork set Says 30,304 cash delivered Mind you i thought that was including the 77BH with 16" bucket and mechanical...

So I've been tractor shopping/researching the last few months and I've narrowed it down to either the Yanmar 424 or Kubota B2650. I've looked at other brands including LS, JD, Massey and Kioti but I want to stick with Japanese build/design and both Yanmar and Kubota have the best local dealer...

I just got my new B2650. I was clearing out the side yard of weeds and little trees. There were some really small stumps sticking up about a foot or so. They were maybe an inch or so wide. I backed up over them and heard a noise. I didn't think much of it at the time, but I could smell...

Does anyone know how much a kubota grass catcher would cost for the B2650 with a 60" mmm? There is one listed on the kubota website. I've read they are a pain to install/remove what other ways are there to rake up the grass? I've been using a cheap sears tow behind.

Hi Guys, it's been a long time since I've been on here. My current 2001 B2910 has almost 1900 hours on it, runs fine and the only problem is a hydraulic leak on one of the curl cylinders. I've been extremely happy with this tractor, even more so after putting on a Sims cab with heater. :)...

Brand new B2650. No matter how far forward or back I adjust the seat it rocks back and forth even on slight bumps in the field and I can hear and feel the thump repeatedly even over the engine noise and wearing ear muffs. Is this poor engineering or is there something I can do? All the seat...

Have had my B2650 with cab for two days and compared to the 21year old Ford 1215 I traded in this unit is really loud! Both have the HST transmission. Borrowed a decibel meter from a neighbor and at 2400 rpm standing still the engine puts out 67db but when the HST is engaged and riding in the...

I've read both good reviews, and some concerns about Kubota possibly cutting corners on this model. Flex in the floor panels as well as the fenders, etc.. Wondering what the current opinons are on this model after being in service for a while.

Like to add a set of mirrors onto a B2650. Wondering if anyone has done so and can post some photos. Also, am I right in that the rops can't be folded down while using the 3ph on this model?

Picked up my brand new B2650 this afternoon and drove it around the property for fun to try out all the levers and knobs. Fortunately the radio head set I use in my NH T4.75 plugs into the radio in the Kubota just fine. Later on was working on cutting the PTO shaft on a new shredder to fit the...

I'm looking for a tractor/FEL/BH and the B series should fit me well. I'll be digging for level off for a new semi above ground pull, putting an edition on my house so I need to dig into the hill for a foundation and some trenching for drains, etc. Other than that, I will be using the tractor...

Hi Everyone, First real post, first real tractor. :) I just received my shiny new B2650 Kubota with 60" MMM, backhoe, forks and quick attach bucket. I love the tractor so far, the only annoying thing is the 3-point hitch and backhoe interference. According to the manual and dealer, you must...

Hi all, bought a new B2650 and was wondering if it was normal for the MMM to be hard to pin up out of the way. I have to jack it up into place to install pins. Is this normal??

Hi Everyone, I've been researching and lurking on here for a while and I'm going to pull the trigger on a tractor sometime this summer. It will be the first tractor I've personally owned but I have experience with them through my family and some of the places I've worked. I recently came...

Is there any cheap place that sells the B2650 air filter that is kubota and not a knock off? It's part 6C060-99410. By the time you add shipping cost it's around $46 bucks.

Im new to the whole forum world and just realized i posted this question under the wrong topic so here it goes. Im picking up my new B2650 with the following : FEL, 60in quick attach bucket, third fiction valve installed, R4 tires, BH77 backhoe with mech thumb. My dealer gave me a price of...

so I'm picking up my first tractor next week and want to make sure I'm getting a good price. Its a brand new B2650 with the following: FEL with quick attach 60in bucket, third action valve installed, R4 tires, Bh77 backhoe with separate rear seat ( i want to keep suspension seat). What should...

Looking at purchasing a Kubota B2650. Is the 2650 a "large frame" B Series tractor like the B7800? Also, what Kubota models does the 2650's MMM fit, other than the B2650? And, what other Kubota models does the 3ph grass bagger fit, other than the 2650? Is the 2650's HST different than the...

I'm having a few problems installing my new mmm. I'm having trouble figuring out Kubotas instructions on this one. Got the front bracket on no problem. Trying to work out were the rear brackets go. The manual says I don't need the mid brackets as I have a Fel. Some pictures of one installed...

Just getting familiar with my new B2650 HSD. I noticed that the entire left side body work flexes when stepping on the entry step and up onto the seat. Is this normal? It seems excessive and not representative of what one would consider a sturdy build. I am only 180lbs- hardly a big man.

Just brought home a new B2650 HSD w/ 534 loader, QA 60" bucket, 5ft brush hog and grading scraper. Time to put it to work on the "farmette". Thanks to all the posts on TBN in helping me decide among the many choices. Was debating B2601, B2650 and L2501.

Hi I have a B2650 and just picked up a PTO generator to power the house during power outages. Are there any quick tricks to disarming the kill switch in the seat so I can run the PTO while off the tractor? Or will I need to manually jump it / permanently bypass it. I have a the backhoe package...

Looking for rear blade, rake, grader box, and a quick attach 3 point hitch for B2650 for trail work, drive grading, general property work. I do tend to be somewhat rough on equipment. Depending upon cost I may get all at once or as I need them. Was thinking I'd use Land Pride but looked at...

Just looked at a used B2650 and noticed that it was difficult to operate the loader smoothly. The tractor would jump around during the operation. Wonder if this is normal for this model?

While after an exhaustive search and considering buying new I bought a 2013 with 1100 hrs Fel, 60" rear blower, mmm and quick attach forks. After thinking about a BX I am glad I went with the larger frame. I have 3 acres and plan to do some landscaping and a garden this summer and of course...

I've narrowed it down to a B2650 with turf tires, 72" mmm, FEL with QA 60" bucket. It will be used for mowing (a lot more than I do presently), driveway maintenance, moving of brush, trees, and rocks, and a couple small fields as well as trail cutting a couple times a year. Near future purchases...

My old man snagged a barely used B2650 with 34hrs on it today..! He was looking to buy a new B2601 setup the same but this one showed up at the local Kubota dealer 5 mins from his house. It came with a BH77 with the mechanical thumb kit, 60"QA bucket, the hydraulic quick attach for the snow/dirt...

hello does anyone no what the insize diameter of the lower radiator hose is. i want to put a inline heater but mot sure if its a 1 1/4 or 1 1/5 hose size thanks

I finally found what mounts on the front of the frame, lol. I also noticed the 8 lug front axle. Can you get Bi-Speed in the US on a 2650? Here is a link to the PDF:http://www.kubotasa.co.za/images/Brochures/B2650.pdf

Our village is looking to purchase a new "side-walk" tractor and must be less than 60" and front snow-blower capable. Also will see mower duty in the summer.Just checking if any-one has this particular tractor(B2650 HSTC).Not interested in other brands.Have heard of some problems with the...

I just got to use my B2650 Cab tractor for the first time.The whine from the transmission is almost unbearable.I did try it out before I bought it and debated over buying it because of the noise.In the end,I bought it because it fit my needs and I was hoping I could get used to the noise.Have...

Got tired of mowing around it so i drcided to take it out I used BXpanded's ripper attachment to cut through the roots.I had to have a little help from the F250 to get it out of the hole.

Can anyone tell me if that little flat bar that i have circled should be bloted to the frame if so which hole because it aligns up with a few? As the dealer has it installed now it will just spin around. The right side does not have it. I'm trying to get the linkage aligned to hold up the...

Bought a used Kubota 2650 with 60 hours on it a month ago. It has loader and backhoe. Looking to add a new front mounted snowblower and Landpride rototiller. Price quotes I have gotten look like list price. Will there be any negotiating room with just attachments? I am in the northeast.

I loosend the top of the the injector line.Do i need to take the line completetly off the injector or loosen the injector itself to bleed it.I've never done this before.Any help would be appreciated.

I was planning to purchase a B2650 with the factory cab option. I prefer a cab version as we have extreme weather conditions. My garage has a 7 foot door and the Kubota's overall height is listed at 84.6 inches or just a hair over a half inch too tall to make it through the garage. I really...

Boot was tore off by bent guard around shaft on left side. I priced a new end because the boot was not sold separately. $115 so i said i will wait till i have to replace it.I made my own boot out of the rubber sleeve that slips over PTO shaft.Cut it to length and drilled a 1/2 hole in the end...

Looking at a 2014 Kubota B2650 model. Hoping someone has some feedback on this model? Is this a tier 4?

Hi everyone. I have a build sheet and I am curious about your opinions on the prices. This is my first tractor and I'm excited but nervous and want to try to get the best deal I can. I know the dealer needs to make money but they don't need to get rich off me. Lol also the dealer quoted me...

I installed some LED bulbs in the headlights of my new B2650 and that seemed to help the putrid lighting that comes from the factory...being on a roll, I decided to put some LED bulbs in the tail lights too. Pulled lens off, stuck in an 1156 led bulb, reinstalled lens and checked lights..LED...

I am a relatively new owner of a B2650. My first post on this site. I frequent orange tractor talks, so I'm kinda cheating by asking advice here, so don't rat me out. :laughing: I'm looking for some hard facts as I'm having a dispute with my dealer. I have contacted kubota corp. directly and...

Does anyone have a 2650 with the 72" deck that can comment on how easy or difficult it is to put on and off? If it is a drive over that would at least save having to push the thing under from the side but looking on Kubota's site I'm not sure it is? I've been so darn happy with my Kubota I hate...

Anyone replaced the speakers in their B2650/3350? I'm wanting to replace my speakers and maybe add 1-2 more, I was think about adding 1 in between the radio and a/c controls on that flat spot. Need to take off the roof or the headliner and see how much room I have to work with. Any pics would...

Looking at a used 2650 with a loader and backhoe. It has 60 hours. It's on a non kubota lot and the dealer is asking 24,000. I asked him and he said he would add the kubota 3rd function valve for the loader and the mechanical thumb for the backhoe. Said he would give 7500 trade in for my...

My tractor requirements will likely be changing to include a lot more mowing, brush hogging a couple small fields once a year along with mowing trails through the woods, and moving snow and brush. The main use will be all the mowing so light weight is better and I prefer a 72" mmm. Many...

New to the forums and just purchased a Kubota B2650HSDC. Any must have mods or accessories I need? I'm thinking I'm going to do a backup and Fel camera. Also going to do front and rear led cab lights.

Is the HST filter located on the left side of the tractor by the rear tire? I just wanted to be sure that is where. I'm confused about the HST filter and the Hydraulic Filter locations.

Hello all! Happend upon this site while researching the Kubota b50 series, I have found a like new 2014 B2650HSDC only 80 hours. Tractor comes with Kubota 60" MMM and Fel, and radio installed. Like I said it looks brand new. What should this sale for used? Thanks

Hello, Strongly considering buying a L2501 or B2650 with backhoe and front loader. I'm curious what people's opinions are for these two tractors. The L2501 seems very comfortable for me. I'm 6'4" and it fire me well. The L seems like it's about same size as the B but maybe a little...

I bought a B2650 in November with the loader and backhoe, thumb, ssqa, 3rd function valve, 60" bucket, rear remotes, alternator upgrade, industrial tires loaded, stabilizer pads, and wheel spacers. It now has 98 hours on it and was thinking of trading up to a L45. The dealer quoted me about 25%...

While using the tractor today, cleaning up after taking down some trees, the hydraulics stopped working. Symptoms: The only circuit that works is the bucket curl. The 3 point, bucket lift, and 3rd function for the loader are all non-operational. If I shut it down, and start it up and use the...

Not exactly a pro videographer, but thought I'd make a video of the Kubota B2650 in action for anybody that's wondering if a tractor this size will work for you. Probably could have made the PIP smaller, first attempt at that so next time it should be easier. I took down five good sized Elm...

I have started to look at both these tractors as a possible upgrade/ replacement for my B2920 and ZD mower. My main reason is twofold, the heat in South Texas and the dust (its dry here send rain). My B 2920 does everything I ask of it so its not a matter of having the wrong tractor, just would...

I searched but couldn't find to much information. I did find a couple of prices but not to meany so anyway I am starting the search to buy a b2650. I'm still a bit torn between the b2650 and the b3350 this will be my first tractor and is already more then I need for my 2 acres. I hope to buy...

Have had my tractor for 1 1/2 years, works well and gets the job done. Been using the backhoe all this time. Purchased a few implements to help with a clearing project, so finally removed the backhoe today. Went to install the 3 pt arms, and have run into a huge snag. Unless, Im totally missing...