Kubota b6000

   / Kubota b6000 #1  

georgieporgie

New member
Joined
Feb 1, 2004
Messages
1
The 3 point lift arms on my b6000 lift right up but gradually sink all the way down, even without a load on them. Any advice would be appreciated.
 
   / Kubota b6000 #2  
on my b6100e there is a adjustment under the seat. It is a bolt with a nut on it. Turn it in to slow the decent and turn it out to slow the decent.
 
   / Kubota b6000 #4  
I had a B6000 and I am pretty sure there was no flow adjustment under the seat; so I think you are going to have to have a look at the hydraulic pump. If you have a shop manual, it will help to know the best way to get at the little bugger. I suppose before you do that you should make sure your gear case has enough oil...although that rarely is the problem.
 

Tractor & Equipment Auctions

TAKEUCHI TL8R2 SKID STEER (A51242)
TAKEUCHI TL8R2...
2013 MACK PINNACLE CHU613 DAY CAB (A50854)
2013 MACK PINNACLE...
2007 FORD F-750XL SUPER DUTY DUMP TRUCK (A50459)
2007 FORD F-750XL...
2002 PETERBILT 330 CARGO TRUCK (A50854)
2002 PETERBILT 330...
Toro Z Master Mower (A50324)
Toro Z Master...
WEATHERFORD MP-10 TRIPLEX MUD PUMP POWERED BY A CATERPILLAR 3412 ENGINE (A50854)
WEATHERFORD MP-10...
 
Top