georgieporgie
New member
- Joined
- Feb 1, 2004
- Messages
- 1
The 3 point lift arms on my b6000 lift right up but gradually sink all the way down, even without a load on them. Any advice would be appreciated.
Kubota b6000
- Thread starter georgieporgie
- Start date
- Views: 1080
-
- Tags
- kubota b6000
jeep_xj_99
New member
on my b6100e there is a adjustment under the seat. It is a bolt with a nut on it. Turn it in to slow the decent and turn it out to slow the decent.
DAP
Veteran Member
- Joined
- Nov 28, 2001
- Messages
- 1,180
- Tractor
- JD LX288 and a B7800
and remember, if you turn it any other way, you'll slow the descent. /forums/images/graemlins/grin.gif
SteveM
Gold Member
I had a B6000 and I am pretty sure there was no flow adjustment under the seat; so I think you are going to have to have a look at the hydraulic pump. If you have a shop manual, it will help to know the best way to get at the little bugger. I suppose before you do that you should make sure your gear case has enough oil...although that rarely is the problem.
