MutantGenepool
Member
G'Day,
Got a problem with a air leak into the coolant. No coolant is getting into the oil.
The water pump and thermostat chambers slowly fills up with air and then over heats because the pump push water.
I've installed a new head gasket.
The reason for the pic is just to show the gasket mark on the head on the injector insert. In two cylinders the insert has rotated a little bit, (this pic is off the internet) and wondering if air can get past the insert and into the coolant.
Is there any way to fix this if that is so?
Thanks.
Got a problem with a air leak into the coolant. No coolant is getting into the oil.
The water pump and thermostat chambers slowly fills up with air and then over heats because the pump push water.
I've installed a new head gasket.
The reason for the pic is just to show the gasket mark on the head on the injector insert. In two cylinders the insert has rotated a little bit, (this pic is off the internet) and wondering if air can get past the insert and into the coolant.
Is there any way to fix this if that is so?
Thanks.