davedj1
Veteran Member
I have spent thousands with surplus center with no issues.
Kubota hoses
- Thread starter jimux
- Start date
- Views: 3227
Smokeydog
Elite Member
Replaced all FEL hoses on a B20 from Surplus Center. Much better than the OEM hoses.
LD1
Epic Contributor
Hoses can be made in many configurations of end's and exact lengths. I'd say buying a "set" of JCB hoses and thinking they are gonna work on a B21 kubota has a zero chance of working.
Take hoses to a local shop and have made exact, or identify the size and type of ends, measure the length, and use any one of a dozen online sources
Take hoses to a local shop and have made exact, or identify the size and type of ends, measure the length, and use any one of a dozen online sources
Tinhack
Elite Member
- Joined
- Jul 3, 2020
- Messages
- 3,079
- Location
- Lytle, TX
- Tractor
- Ford 3910, John Deere 420C, Kubota G32XKS, IH 2606, Bad Boy Maverick-60"
The only drawback to Surplus Center is their pre-made hoses are mostly in 1-foot increments. If you can get by with a 36" in place of a 30", or similar length differences, the hoses are high quality at good prices.
ericm979
Super Member
- Joined
- Nov 25, 2016
- Messages
- 5,839
- Location
- Santa Cruz Mountains CA, Southern OR
- Tractor
- Branson 3725H Deere 5105
I use DiscountHydraulicHose for hoses by the inch. They're a little more expensive than SurplusCenter's hoses by the 6" (for short lengths) or 1' increment.
Tying a string to the BH hose you're replacing is a good idea.
Tying a string to the BH hose you're replacing is a good idea.
