Kubota U45 Mini-Excavator Questions

   / Kubota U45 Mini-Excavator Questions #1  

walker450

Platinum Member
Joined
Apr 1, 2008
Messages
544
Location
OK
Tractor
M5040, BX25D, F2880, ZD1211, GR2120
Anyone know much about the Kubota U45-3 Excavators? Found a 2011 model with 1800 hours, asking proce is 30,000, which seems high until I started looking, and it isn't too far off. It has an angle blade and hydraulic thumb. It is a little beat up but nothing too bad compared to others of similar age. Pre-emissions which is a good thing.

Any information or opinions etc would be appreciated.
 

Attachments

  • Screenshot_20250219_181907_Chrome.jpg
    Screenshot_20250219_181907_Chrome.jpg
    639.1 KB · Views: 64
  • Screenshot_20250219_181931_Chrome.jpg
    Screenshot_20250219_181931_Chrome.jpg
    459.9 KB · Views: 58
  • Screenshot_20250219_181949_Chrome.jpg
    Screenshot_20250219_181949_Chrome.jpg
    541.6 KB · Views: 59
   / Kubota U45 Mini-Excavator Questions #2  
It does seem expensive for an open station machine. How tight are all the pins and bushings? Depending on how it's been greased, they can get really sloppy and are probably expensive to replace.
 
   / Kubota U45 Mini-Excavator Questions
  • Thread Starter
#3  
I plan on looking at it in person next week and will check how sloppy it is.

I found a later model KX057-4 with cab and 3500 hrs for $35,000, but it's 7 hours away from me.
 
Last edited:
   / Kubota U45 Mini-Excavator Questions #4  
I have a U27-4 cabbed unit and its great, no worry about spinning around and hitting a building or tree due to its inside the tracks house footprint. I wish this model came with a Tilt/Angle front blade..

1800 hrs is not much, 30k is not bad assuming mechanically its good.
 
   / Kubota U45 Mini-Excavator Questions
  • Thread Starter
#5  
Thanks for the advice guys. Both machines I mentioned sold before I could get away to look at them.

I found and bought a 2018 KX-040-4 1635 hrs cab thumb 6 way blade for $33k, it has some whiskey dings and needs a few things but I am thrilled with the deal. I plan to make a separate thread about it.
 

Attachments

  • 20250313_192048.jpg
    20250313_192048.jpg
    4.4 MB · Views: 102
   / Kubota U45 Mini-Excavator Questions #6  
I plan on looking at it in person next week and will check how sloppy it is.

I found a later model KX057-4 with cab and 3500 hrs for $35,000, but it's 7 hours away from me.
I would be all over that, no matter how far it is
 
   / Kubota U45 Mini-Excavator Questions
  • Thread Starter
#7  
Thanks, it sold before I could arrange a trip, I found a 2018 KX-040-4 with 1635 hrs cab thumb 6 way blade for $33k so I think I came out good overall. Video here:
 
   / Kubota U45 Mini-Excavator Questions #8  
I plan on looking at it in person next week and will check how sloppy it is.

I found a later model KX057-4 with cab and 3500 hrs for $35,000, but it's 7 hours away from me.
KX057-4(y)
 

Tractor & Equipment Auctions

1998 KENTUCKY ENCLOSED CAR HAULER (A43004)
1998 KENTUCKY...
2012 KENWORTH T800 MID-ROOF SLEEPER (INOPERABLE) (A45333)
2012 KENWORTH T800...
30Yd Roll-Off Dumpster (A44571)
30Yd Roll-Off...
2016 INTERNATIONAL LONESTAR TANDEM AXLE SLEEPER (A43003)
2016 INTERNATIONAL...
Kawasaki Mule 2510 (A44391)
Kawasaki Mule 2510...
(1) HD 12ft 6in Panel (A44391)
(1) HD 12ft 6in...
 
Top