lack of power on FEL
- Thread starter seabass
- Start date
- Views: 1380
Internal cylinder leak, control valve internal leak, weak pump, relief valve opening too soon, relief valve having a hunk of snit holding it partially open. Those are the common issues. Typically, it's a cylinder packing leak or relief valve on a newer tractor. Weak pump on an older one.
Best way to check is with a gage.
jb
Best way to check is with a gage.
jb
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If you have da cyls.. remove the drop hose and pressureize the lift hose.. if oil comes out the fitting on the cyl.. they are bypassing.
past that.. I'd stick a valve in the system and see what it is making / relieving at..
soundguy
past that.. I'd stick a valve in the system and see what it is making / relieving at..
soundguy
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Your info kind of runs together, but I think I understand what you are saying:
1. Your FEL seems to lack power.
2. It has no external leaks.
3. It holds a load when raised, no drooping or dropping.
From this, I suspect that there is nothing wrong with the cylinders or valves. I think it may be technique or perhaps the hydraulic system does not have enough pressure. I would check the hydraulic pressure at the quick connects going to the FEL using a gage plumbed to a male quick connect. Do you know what the pressure is supposed to be?
If you could give us a little more info on the tractor and how long you have had it, we might be able to help more. Otherwise, it's impossible to be very specific. We have no idea what your tractor is rated at or what type work you are doing with it. Please give a little more info.
