Let's see your Kubota

[bleedsgreendrivesorange]

Here is a picture of Elmo at 2 days old. Sadly had to leave for work on day 4 but looking forward to some action pics when I get home! L4740. Ductape, your material/trailer handler on the front is excellent, is it a one off or did you purchase somewhere?

 

[Ductape]

Ductape, your material/trailer handler on the front is excellent, is it a one off or did you purchase somewhere?

Had an extra SSQA plate and some scrap steel...... added a couple 2" reciever tubes and a little mig wire.

 

[bleedsgreendrivesorange]

Had an extra SSQA plate and some scrap steel...... added a couple 2" reciever tubes and a little mig wire.

Definitely on my to do list now. Excellent idea :thumbsup:

 

[projack]

My 2008 L3400 bought in the US new, and transported to Easter Europe :laughing:

 

[Steve in MT]

L3400DT with dozer blade. Works well for snow plowing, spreading gravel and moving dirt. Woods 72" mower and a temporary make shift way of raising roof panels to replace hail damaged steel.

 

[newtattoobob]

Where did you get the blade for your L3400? I never seen one before!

 

[Steve in MT]

I found the dozer blade at the Kubota dealer where I bought the tractor. It was a traded in on something else and sat on the lot for a few years. The dozer blade has to be about 10 years old (or older) and it was never mounted or used. I did some research on it and as near as I could figure, it was made in Canada and, as far as I know, the company is no longer in business. It was a universal setup that just needed the mounting brackets to match the tractor. A large rectangular tube goes all the way back and is attached to the drawbar so that there is no stress on the front of the tractor, so to speak. All I had to do was modify the front brackets and make a "U" adaptor at the drawbar.This is a really well made unit so if you can find a used one, go for it. I did find one on "Fastline.com" a while back



)

 

[newtattoobob]

Thanks for the pics! I would love to find one, it looks like a very well built unit.

 

[senecak19]

Just keeping the thread alive....

 

[senecak19]

Just keeping the thread alive....

 

[WaxMan]

Here is a picture of Elmo at 2 days old. Sadly had to leave for work on day 4 but looking forward to some action pics when I get home! L4740. Ductape, your material/trailer handler on the front is excellent, is it a one off or did you purchase somewhere?

Bleedsgreen Are those factory backhoe stabilizer pads? The pads I just picked up at the dealer has the rubber sections vertical in the pads? I would have thought they would be like yours in your photo but there not.

 

[buildingup]

MX5100 Month old and just over 30 hrs and only have been able to use half the month due to rain.

 

[buildingup]

MX5100 Month old and just over 30 hrs and only have been able to use half the month due to rain.

 

[RaydaKub]

MX5100 Month old and just over 30 hrs and only have been able to use half the month due to rain.

Looks to me like you need to update your Tractor: info. With one as nice as that, I doubt you are shopping anymore. :thumbsup:

 

[troutsqueezer]

Mighty Mouse

 

[jimrs]

Here is mine I don't use it much but would not be without it.

 

[Jay4200]

'94 L4200 (2700 hrs)
Side-panels are off in the winter shot so the mice don't move in (old wive's tale that I'm going with...)

 

[ptsg]

Here is my Kubota B7000 with homemade front weight, 3pt hitch and brush mower

 

[MortalWombat]

Here's my new B2320 with a Piranha Tooth Bar from BXpanded. Just got done taking out some invasive honeysuckle bushes and some mostly dead evergreens from our landscaping.

 

[MortalWombat]

Oops. Forgot to attach the pic.